PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60-4370
60-4370 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, overall_length: 0.750 INCHES NOMINAL IN, overall_diameter: 4.690 INCHES NOMINAL IN, bolt_hole_diameter: 406.000 INCHES NOMINAL IN, feather_edge_angle: 30.0 DEGREES NOMINAL, bolt_circle_diameter: 3.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-215-5531, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-4370
NSN: 5340-00-215-5531
FSC: 5340
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialLEATHER OVERALL
overall_length0.750 INCHES NOMINAL IN
overall_diameter4.690 INCHES NOMINAL IN
bolt_hole_diameter406.000 INCHES NOMINAL IN
bolt_hole_quantity6
feather_edge_angle30.0 DEGREES NOMINAL
bolt_circle_diameter3.000 INCHES NOMINAL IN
center_hole_diameter2.125 INCHES NOMINAL IN
fsc_application_dataHOIST UNIT,LIFT FORK TRUCK
base_material_thickness0.188 INCHES NOMINAL IN
recess_major_inside_diameter4.355 INCHES NOMINAL IN
NSN5340-00-215-5531
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60-4370 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 4.690 INCHES NOMINAL IN
•
RECESS MAJOR INSIDE DIAMETER: 4.355 INCHES NOMINAL IN
•
FEATHER EDGE ANGLE: 30.0 DEGREES NOMINAL
•
MATERIAL: LEATHER OVERALL
•
FSC APPLICATION DATA: HOIST UNIT,LIFT FORK TRUCK
•
BOLT HOLE QUANTITY: 6
•
BOLT HOLE DIAMETER: 406.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER4.690 INCHES NOMINAL IN
OVERALL LENGTH0.750 INCHES NOMINAL IN
RECESS MAJOR INSIDE DIAMETER4.355 INCHES NOMINAL IN
FEATHER EDGE ANGLE30.0 DEGREES NOMINAL
MATERIALLEATHER OVERALL
FSC APPLICATION DATAHOIST UNIT,LIFT FORK TRUCK
BOLT HOLE QUANTITY6
BOLT HOLE DIAMETER406.000 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.000 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
0126236Interchangeable
interchangeable cross-reference
interchangeable
7035390Interchangeable
interchangeable cross-reference
interchangeable
70126236Interchangeable
interchangeable cross-reference
interchangeable
60-4370Interchangeable
interchangeable cross-reference
interchangeable
1039/00Interchangeable
interchangeable cross-reference
interchangeable
OL-8552Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60-4370?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-4370?
60-4370 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 60-4370?
There are 13 known substitutes for 60-4370: 0126236, 7035390, 70126236 and 10 more. Substitute compatibility should be verified for your specific system.
Is 60-4370 still available?
60-4370 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-4370

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026