60-210PC180 — GEAR,SPUR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

60-210PC180: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL UNS K24065 OVERALL, body_style: PLAIN, SOLID, bore_style: W/ 2 KEYWAYS BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 2.0000 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-294-7806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

60-210PC180

NSN: 3020-00-294-7806
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 27235 — HARDIE-TYNES CO., INC. (USA)

SPECIFICATIONS

material	STEEL UNS K24065 OVERALL
body_style	PLAIN, SOLID
bore_style	W/ 2 KEYWAYS BOTH ENDS
tooth_form	STANDARD
pitch_diameter	2.0000 INCHES NOMINAL IN
pressure_angle	20.0000 DEGREES
teeth_quantity	16
style_designator	HUBLESS
face_nominal_width	0.750 INCHES IN
keyway_nominal_width	0.250 INCHES BOTH ENDS IN
bore_nominal_diameter	1.250 INCHES BOTH ENDS IN
nominal_outside_diameter	2.250 INCHES IN
NSN	3020-00-294-7806

COMPONENT DIAGRAM

KEY FEATURES

•

KEYWAY NOMINAL WIDTH: 0.250 INCHES BOTH ENDS IN

•

BORE NOMINAL DIAMETER: 1.250 INCHES BOTH ENDS IN

•

TEETH QUANTITY: 16

•

BODY STYLE: PLAIN, SOLID

•

BORE STYLE: W/ 2 KEYWAYS BOTH ENDS

•

STYLE DESIGNATOR: HUBLESS

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

PITCH DIAMETER: 2.0000 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

KEYWAY NOMINAL WIDTH	0.250 INCHES BOTH ENDS IN
BORE NOMINAL DIAMETER	1.250 INCHES BOTH ENDS IN
TEETH QUANTITY	16
BODY STYLE	PLAIN, SOLID
BORE STYLE	W/ 2 KEYWAYS BOTH ENDS
STYLE DESIGNATOR	HUBLESS
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER	2.0000 INCHES NOMINAL IN
TOOTH FORM	STANDARD
NOMINAL OUTSIDE DIAMETER	2.250 INCHES IN

SUBSTITUTES & CROSS-REFERENCES 9

55-234Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

60-357PC180Reference document

Same NSN cross-reference

Reference document — Secondary reference

60-531PC180Reference document

Same NSN cross-reference

Reference document — Secondary reference

H3291891PC180Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

60-521PC180Reference document

Same NSN cross-reference

Reference document — Secondary reference

60-671PC180Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 60-210PC180?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 60-210PC180?

60-210PC180 is a GEAR,SPUR.

What parts can replace 60-210PC180?

There are 9 known substitutes for 60-210PC180: 55-234, 60-357PC180, 60-531PC180 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 60-210PC180?

60-210PC180 is cataloged in the U.S. Government catalog under NSN 3020-00-294-7806. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

60-210PC180 — GEAR,SPUR

Request a Quote — 60-210PC180