PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60-2064
60-2064 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE SEAL, bore_diameter: 0.3125 INCHES NOMINAL IN, load_direction: RADIAL, inner_ring_width: 0.5580 INCHES NOMINAL IN, outer_ring_width: 0.3750 INCHES NOMINAL IN, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-428-3627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-2064
NSN: 5340-01-428-3627
FSC: 5340
CAGE: 30226 — CURT MANUFACTURING LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE SEAL
bore_diameter0.3125 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
inner_ring_width0.5580 INCHES NOMINAL IN
outer_ring_width0.3750 INCHES NOMINAL IN
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
overall_outside_diameter1.2500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
NSN5340-01-428-3627
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60-2064 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
KP5Interchangeable
interchangeable cross-reference
interchangeable
060-201491Interchangeable
interchangeable cross-reference
interchangeable
60-2064Interchangeable
interchangeable cross-reference
interchangeable
5HD337Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60-2064?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-2064?
60-2064 is a BEARING,BALL,AIRFRAME.
What parts can replace 60-2064?
There are 4 known substitutes for 60-2064: KP5, 060-201491, 60-2064 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-2064?
60-2064 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-428-3627. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-2064

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026