PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60-19-6579
60-19-6579 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, thread_length: 0.312 INCHES MINIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-883-8689, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-19-6579
NSN: 5305-00-883-8689
FSC: 5305
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
thread_length0.312 INCHES MINIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.216 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch24
NSN5305-00-883-8689
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 60-19-6579 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.312 INCHES MINIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
THREAD QUANTITY PER INCH: 24
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: SLOT
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD LENGTH0.312 INCHES MINIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLESLOT
NONDEFINITIVE SPEC/STD DATAA TYPE
SCREW SURFACE TREATMENTPASSIVATE
HEAD STYLEFLAT COUNTERSUNK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
H2212PC31Interchangeable
interchangeable cross-reference
interchangeable
MIL S933Interchangeable
interchangeable cross-reference
interchangeable
10032Interchangeable
interchangeable cross-reference
interchangeable
179839Interchangeable
interchangeable cross-reference
interchangeable
29N800PC33Interchangeable
interchangeable cross-reference
interchangeable
N9353PC17Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60-19-6579?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-19-6579?
60-19-6579 is a SCREW,MACHINE.
What parts can replace 60-19-6579?
There are 17 known substitutes for 60-19-6579: H2212PC31, MIL S933, 10032 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-19-6579?
60-19-6579 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-883-8689. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-19-6579

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026