<b>Size doesn’t matter</b><br>IB-188M2 is a very small SSD enclosure for one M.2 SSD. This allows you to install the little runabout in an external enclosure and take it with you anywhere. The USB 3.1 Type-C™ port ensures a very high transfer rate, so that your SSD is not bored.<br><br><b>Small and good looking</b><br>The IB-188M2 is a enclosure for a M.2 SSD.
It is entirely built of aluminum with a sand-blasted surface. This looks good and gives stability. With a size of only 11x5 cm, it fits in any pocket.<br><br><b>The new standard</b><br>The connection between host PC and external enclosure is realized by a USB 3.1 Type-C™ port.
Thanks to the USB 3.1 protocol a high data transfer rate of up to 10 Gbit/s can be achieved.<br><br><b>Small storage is mobile storage</b><br>SSDs in the M.2 format are suitable for more than just installation in PCs and laptops because of their small size and high speed, they can be installed in much smaller devices as well. With the IB-188M2 you can take This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 9540-00-119-9022, indicating validated use in U.S. government and defense logistics supply chains.
| length | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT |
| material | STEEL COMP 4140 OVERALL |
| body_style | PLAIN, SOLID |
| teeth_type | STRAIGHT |
| overall_width | 1.000 INCHES NOMINAL IN |
| heat_treatment | T-3511 SOLUTION HEAT TREATED |
| overall_height | 1.000 INCHES NOMINAL IN |
| pitch_diameter | 3.6660 INCHES NOMINAL IN |
| pressure_angle | 14.50000 DEGREES AND 63.4333 DEGREES |
| teeth_quantity | 44 |
| first_tip_style | RIGHT QUARTER RADIUS |
| first_tip_radius | 0.093 INCHES NOMINAL IN |
| NSN | 9540-00-119-9022 |
| NONDEFINITIVE SPEC/STD DATA | 2024 ALLOY AND T3511 TEMPER |
| WEIGHT PER UNIT MEASURE | 0.528 POUNDS PER LINEAR FOOT LBS |
| SECOND TIP STYLE | UPPER RADIUS |
| SECOND TIP RADIUS | 0.093 INCHES NOMINAL IN |
| LEFT SIDE FLANGE THICKNESS | 0.250 INCHES NOMINAL IN |
| HEAT TREATMENT | T-3511 SOLUTION HEAT TREATED |
| BASE FLANGE THICKNESS | 0.250 INCHES NOMINAL IN |
| FIRST TIP STYLE | RIGHT QUARTER RADIUS |
| FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.125 INCHES NOMINAL IN |
| MATERIAL | ALUMINUM ALLOY 2024 |