60-15-4281 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

60-15-4281: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 502 OR NICKEL ALLOY K-500 OVERALL, head_style: FLAT CHAMFER, head_height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, thread_length: 1.096 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-270-3051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

60-15-4281

NSN: 5305-01-270-3051
FSC: 5305 — Screws
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)

SPECIFICATIONS

material	NICKEL ALLOY 502 OR NICKEL ALLOY K-500 OVERALL
head_style	FLAT CHAMFER
head_height	0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_length	1.096 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
fastener_length	1.250 INCHES NOMINAL IN
special_features	SELF LOCKING
thread_direction	RIGHT-HAND
width_across_flats	0.375 INCHES NOMINAL IN
internal_drive_style	HEXAGON
nominal_thread_diameter	0.500 INCHES IN
NSN	5305-01-270-3051

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN

•

HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.250 INCHES NOMINAL IN

•

THREAD LENGTH: 1.096 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.500 INCHES IN

•

HEAD STYLE: FLAT CHAMFER

•

THREAD DIRECTION: RIGHT-HAND

•

NONDEFINITIVE SPEC/STD DATA: 6 TYPE

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.375 INCHES NOMINAL IN
HEAD HEIGHT	0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH	1.250 INCHES NOMINAL IN
THREAD LENGTH	1.096 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.500 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
NONDEFINITIVE SPEC/STD DATA	6 TYPE
SPECIAL FEATURES	SELF LOCKING
INTERNAL DRIVE STYLE	HEXAGON

SUBSTITUTES & CROSS-REFERENCES 9

556-6408040-39Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M1222SN8C320NCLNSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-DTL-1222Reference document

Same NSN cross-reference

Reference document — Identification reference

211040230Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MILS1222TYII1/2 -13UNC-3AX1-1/4Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

FF-S-86Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 60-15-4281?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 60-15-4281?

60-15-4281 is a SCREW,CAP,SOCKET HEAD.

What parts can replace 60-15-4281?

There are 9 known substitutes for 60-15-4281: 556-6408040-39, M1222SN8C320NCLN, MIL-DTL-1222 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 60-15-4281?

60-15-4281 is cataloged in the U.S. Government catalog under NSN 5305-01-270-3051. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

60-15-4281 — SCREW,CAP,SOCKET HEAD

Request a Quote — 60-15-4281