PartsTable
Technical Data Sheet
Download PDF

60-15-1128 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

60-15-1128: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY K-500 OR NICKEL ALLOY 502 OVERALL, thread_class: 3A A, fastener_length: 2.000 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, nominal_thread_diameter: 0.750 INCHES IN, thread_quantity_per_inch: 10. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-292-3276, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-15-1128
NSN: 5305-01-292-3276
NIINs: 012923276, 016446605
FSC: 5305 — Screws
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialNICKEL ALLOY K-500 OR NICKEL ALLOY 502 OVERALL
thread_class3A A
fastener_length2.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_diameter0.750 INCHES IN
thread_quantity_per_inch10
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-292-3276
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 60-15-1128 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 2.000 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 3A A
•
THREAD QUANTITY PER INCH: 10
•
MATERIAL: NICKEL ALLOY K-500 OR NICKEL ALLOY 502 OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
FASTENER LENGTH2.000 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.750 INCHES IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A A
THREAD QUANTITY PER INCH10
MATERIALNICKEL ALLOY K-500 OR NICKEL ALLOY 502 OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 1
2642-857-01 ITEReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 60-15-1128?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-15-1128?
60-15-1128 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 60-15-1128?
There is 1 known substitute for 60-15-1128: 2642-857-01 ITE. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-15-1128?
60-15-1128 is cataloged in the U.S. Government catalog under NSN 5305-01-292-3276. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-15-1128