PartsTable
Technical Data Sheet
Download PDF

60-142-01 — 60-142-01

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

60-142-01: 60-142-01.

The 60-142-01 is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OVERALL, hole_diameter: 1.255 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN, outside_diameter: 1.760 INCHES NOMINAL IN, special_features: CONTAINS SECOND KEY 180 DEGREES FROM OTHER KEY, style_designator: INTERNAL PREBENT KEY, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-590-0227, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 60-142-01
NSN: 5310-00-590-0227
NIINs: 005900227, 014723264
FSC: 5310 — Nuts and Washers
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 OVERALL
hole_diameter1.255 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
outside_diameter1.760 INCHES NOMINAL IN
special_featuresCONTAINS SECOND KEY 180 DEGREES FROM OTHER KEY
style_designatorINTERNAL PREBENT KEY
surface_treatmentCADMIUM OVERALL
material_thickness0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
wire_hole_diameter0.069 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
minimum_tensile_strength180000 POUNDS PER SQUARE INCH LBS
internal_prebent_key_width0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-00-590-0227
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 60-142-01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIRE HOLE DIAMETER: 0.069 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
INTERNAL PREBENT KEY WIDTH: 0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: INTERNAL PREBENT KEY
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.760 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIRE HOLE DIAMETER0.069 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
INTERNAL PREBENT KEY WIDTH0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
STYLE DESIGNATORINTERNAL PREBENT KEY
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.760 INCHES NOMINAL IN
MATERIAL THICKNESS0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
SPECIAL FEATURESCONTAINS SECOND KEY 180 DEGREES FROM OTHER KEY
SURFACE TREATMENTCADMIUM OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 1
6157F82Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 60-142-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-142-01?
60-142-01 is a 60-142-01. It is classified as a MRO (MRO_GENERAL).
What parts can replace 60-142-01?
There is 1 known substitute for 60-142-01: 6157F82. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-142-01?
60-142-01 is cataloged in the U.S. Government catalog under NSN 5310-00-590-0227. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-142-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.