PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60-130
60-130 ✓ Verified by PartsTable
Legrand · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

With the IB-CB007 the future is no problem since it allows an smooth transition from Mini SAS HD based devices to the new U.2 interface.Whilst doing that data transfer rates up to 12 Gbit/s are provided.<br><br><b>Snap and connect</b><br>An Mini SAS HD is now easy to connect with an U.2 Interface. This connection lasts, slipping cables are a thing of the past, thanks to the clip.<br><br><b>Full flexibility</b><br>To use the new connection between U.2 and Mini SAS everywhere the IB-CB007 cable adapter offers many possibilities 50 cm cable length.<br><br><b>Full speed</b><br>Whilst steadily providing flexibility and connection stability data transfers with up to 12 Gbit/s are possible. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-853-5017, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
60-130
NSN: 5330-00-853-5017
FSC: 5330
CAGE: 80254 — TEXTRON LYCOMING INC WILLIAMSPORT PLANT (USA)
SPECIFICATIONS
colorWHITE
width36.000 INCHES NOMINAL IN
height0.531 INCHES NOMINAL IN
length8.000 FEET NOMINAL FT
materialALUMINUM OVERALL
thickness0.050 INCHES NOMINAL IN
case_styleRECESSED
head_styleBUTTON
seal_width0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
head_height0.160 INCHES NOMINAL IN
shank_styleSTRAIGHT
hole_diameter0.200 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-853-5017
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60-130 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.630 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.200 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.271 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.271 INCHES NOMINAL IN
•
FSC APPLICATION DATA: RECIPROCATING ENGINE,ACFT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH2.172 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.630 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH2.172 INCHES NOMINAL IN
HOLE DIAMETER0.200 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.271 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.271 INCHES NOMINAL IN
FSC APPLICATION DATARECIPROCATING ENGINE,ACFT
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.630 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER1.530 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
60130Interchangeable
interchangeable cross-reference
interchangeable
D60130Interchangeable
interchangeable cross-reference
interchangeable
403844R1Interchangeable
interchangeable cross-reference
interchangeable
52-975-991-00-007Interchangeable
interchangeable cross-reference
interchangeable
52-430-298-039Interchangeable
interchangeable cross-reference
interchangeable
W7-60 PRODUCT CODE 706Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60-130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-130?
60-130 is a PLASTIC SHEET,LAMINATED,DECORATI manufactured by Legrand.
What parts can replace 60-130?
There are 9 known substitutes for 60-130: 60130, D60130, 403844R1 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-130?
60-130 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-853-5017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026