PartsTable
Technical Data Sheet
Download PDF

60-07-6907 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

60-07-6907: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON LOCKING INSERT, nut_style: HEXAGON, nut_height: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, temp_rating: 800.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-511-0296, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-07-6907
NSN: 5310-01-511-0296
FSC: 5310 — Nuts and Washers
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON LOCKING INSERT
nut_styleHEXAGON
nut_height0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
temp_rating800.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featurePREVAILING TORQUE ALL NONMETALLIC DESIGN
special_featuresNUT IS MODIFIED VERSION FROM NSN 5310-00-721-5447 PER LEN MCAFEE (DSN 4320-5062)
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL EXCEPT INSERT
width_across_flats0.922 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
NSN5310-01-511-0296
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 60-07-6907 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 0.922 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE II, CLASS 2/3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 800.0 FAHRENHEIT MAXIMUM DEGF
•
HOLE CONFIGURATION STYLE: CONFIGURATION A
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-N-25027G/S NAS-25027 MIL SPEC 1ST MATERIAL RESPONSE OVERALL EXCEPT INSERT G
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS0.922 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE II, CLASS 2/3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING800.0 FAHRENHEIT MAXIMUM DEGF
HOLE CONFIGURATION STYLECONFIGURATION A
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-N-25027G/S NAS-25027 MIL SPEC 1ST MATERIAL RESPONSE OVERALL EXCEPT INSERT G
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
B541-1100-109Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 60-07-6907?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-07-6907?
60-07-6907 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 60-07-6907?
There is 1 known substitute for 60-07-6907: B541-1100-109. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-07-6907?
60-07-6907 is cataloged in the U.S. Government catalog under NSN 5310-01-511-0296. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-07-6907

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.