PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6-D

6-D — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The PLUG,ARMOR,PANEL,AIRCRAFT is a the manufacturer industrial component. Key specifications include end_item_identification: MH-60S, criticality_code_justification: AGAV. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5305-00-017-9842, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6-D
NSN: 5305-00-017-9842
FSC: 5305
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
end_item_identificationMH-60S
criticality_code_justificationAGAV
NSN5305-00-017-9842
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 6-D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.000 INCHES MINIMUM IN
•
THREAD QUANTITY PER INCH: 16
•
THREAD CLASS: 2A A
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
TECHNICAL CHARACTERISTICS
THREAD LENGTH1.000 INCHES MINIMUM IN
THREAD QUANTITY PER INCH16
THREAD CLASS2A A
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
HEAD STYLEHEXAGON
HEAD HEIGHT0.234 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
MIL-S-43180 TY1SZ1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-S-43180InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
60S906D-00InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3U457-60S906D-00InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
179842InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
1C622InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6-D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6-D?
6-D is a PLUG,ARMOR,PANEL,AIRCRAFT.
What parts can replace 6-D?
There are 7 known substitutes for 6-D: MIL-S-43180 TY1SZ1, MIL-S-43180, 60S906D-00 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6-D?
6-D is cataloged in the Federal Logistics Information System under NSN 5305-00-017-9842. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6-D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026