PartsTable
Technical Data Sheet
Download PDF

6-549-75 — CABLE ASSEMBLY,SPECIAL PURPOSE,E

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

6-549-75: CABLE ASSEMBLY,SPECIAL PURPOSE,E.

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: ALUMINUM ALLOY OVERALL, seat_angle: 37.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, special_features: SUPPORTS GRUMMAN A-10 AIRCRAFT, thread_direction: RIGHT-HAND ALL ENDS, operating_pressure: 75.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This part is cataloged in the U.S.

Government catalog under NSN 4820-00-141-9029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6-549-75
NSN: 4820-00-141-9029
FSC: 4820 — Valves, Nonpowered
CAGE: 92003 — PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
seat_angle37.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
special_featuresSUPPORTS GRUMMAN A-10 AIRCRAFT
thread_directionRIGHT-HAND ALL ENDS
operating_pressure75.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
disk_loading_methodSPRING
flow_control_deviceDISK
nominal_thread_size0.438 INCHES ALL ENDS IN
valve_operation_methodAUTOMATIC
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
thread_series_designatorUNF ALL ENDS
NSN4820-00-141-9029
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 6-549-75 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.250 INCHES FIRST END IN
•
OPERATING PRESSURE: 75.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
THREAD DIRECTION: RIGHT-HAND ALL ENDS
•
NOMINAL THREAD SIZE: 0.438 INCHES ALL ENDS IN
•
SEAT ANGLE: 37.0 DEGREES ALL ENDS
•
SPECIFICATION/STANDARD DATA: 96906-MS28885 GOVERNMENT STANDARD
•
NONDEFINITIVE SPEC/STD DATA: 4 SIZE
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.250 INCHES FIRST END IN
OPERATING PRESSURE75.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
THREAD DIRECTIONRIGHT-HAND ALL ENDS
NOMINAL THREAD SIZE0.438 INCHES ALL ENDS IN
SEAT ANGLE37.0 DEGREES ALL ENDS
SPECIFICATION/STANDARD DATA96906-MS28885 GOVERNMENT STANDARD
NONDEFINITIVE SPEC/STD DATA4 SIZE
DISK LOADING METHODSPRING
SPECIAL FEATURESSUPPORTS GRUMMAN A-10 AIRCRAFT
SUBSTITUTES & CROSS-REFERENCES 8
544-4D1Reference document
Same NSN cross-reference
Reference document — Secondary reference
4CB240Reference document
Same NSN cross-reference
Reference document — Secondary reference
588-4D63Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS28884B-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10-1344-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-V-7899Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6-549-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6-549-75?
6-549-75 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 6-549-75?
There are 8 known substitutes for 6-549-75: 544-4D1, 4CB240, 588-4D63 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6-549-75?
6-549-75 is cataloged in the U.S. Government catalog under NSN 4820-00-141-9029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6-549-75