PartsTable
Technical Data Sheet
Download PDF

6-40884-3 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6-40884-3: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, fork_depth: 0.450 INCHES NOMINAL IN, shank_length: 0.660 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN, overall_width: 0.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-480-7281, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6-40884-3
NSN: 5340-00-480-7281
FSC: 5340 — Hardware, Commercial
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
fork_depth0.450 INCHES NOMINAL IN
shank_length0.660 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
thread_class3B ROD CONNECTION
hole_diameter0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
overall_width0.438 INCHES NOMINAL IN
thread_length0.780 INCHES MINIMUM AND 0.820 INCHES MAXIMUM ROD CONNECTION IN
overall_height0.438 INCHES NOMINAL IN
shank_diameter0.310 INCHES NOMINAL IN
fork_span_width0.300 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-480-7281
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6-40884-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.310 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.300 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.070 INCHES NOMINAL IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.780 INCHES MINIMUM AND 0.820 INCHES MAXIMUM ROD CONNECTION IN
•
SHANK LENGTH: 0.660 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.310 INCHES NOMINAL IN
OVERALL HEIGHT0.438 INCHES NOMINAL IN
FORK SPAN WIDTH0.300 INCHES NOMINAL IN
FORK ARM THICKNESS0.070 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.250 INCHES NOMINAL IN
THREAD LENGTH0.780 INCHES MINIMUM AND 0.820 INCHES MAXIMUM ROD CONNECTION IN
SHANK LENGTH0.660 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.438 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6-40884-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6-40884-3?
6-40884-3 is a CLEVIS,ROD END.
What is the NSN for 6-40884-3?
6-40884-3 is cataloged in the U.S. Government catalog under NSN 5340-00-480-7281. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6-40884-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.