PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P
6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-658-2565, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P
NSN: 5305-01-658-2565
FSC: 5305
CAGE: 0BWZ1 — PENCOM (USA)
SPECIFICATIONS
Part Number6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P
NSN5305-01-658-2565
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 32
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.124 INCHES MINIMUM IN
•
EXTENDED WASHER DIAMETER: 0.307 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.307 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION4920-01-495-9100
THREAD QUANTITY PER INCH32
FASTENER LENGTH0.250 INCHES NOMINAL IN
THREAD LENGTH0.124 INCHES MINIMUM IN
EXTENDED WASHER DIAMETER0.307 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
HEAD DIAMETER0.307 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD DIRECTIONRIGHT-HAND
HEAD STYLEFILLISTER EXTENDED WASHER
HEAD HEIGHT0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
6014722Interchangeable
interchangeable cross-reference
interchangeable
B8123Interchangeable
interchangeable cross-reference
interchangeable
6014722-001Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P?
6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P is a 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P.
What parts can replace 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P?
There are 3 known substitutes for 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P: 6014722, B8123, 6014722-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P?
6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-658-2565. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6-32X1/4PH-PN-SQCN-SEMS-MS-SS-P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026