PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6-1AALT1PC30
6-1AALT1PC30 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hardness_rating: 50.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 2.625 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 2.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-256-1030, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6-1AALT1PC30
NSN: 5330-00-256-1030
FSC: 5330
CAGE: 47496 — THE DEWEY ELECTRONICS CORPORATION DIV PITOMETER LOG DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hardness_rating50.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter2.625 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter2.000 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-256-1030
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6-1AALT1PC30 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 2.000 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 50.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER2.000 INCHES NOMINAL IN
OUTSIDE DIAMETER2.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING50.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORCIRCULAR
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
S107-1Interchangeable
interchangeable cross-reference
interchangeable
STI-702Interchangeable
interchangeable cross-reference
interchangeable
138C107H01Interchangeable
interchangeable cross-reference
interchangeable
5866Interchangeable
interchangeable cross-reference
interchangeable
L323Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6-1AALT1PC30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6-1AALT1PC30?
6-1AALT1PC30 is a GASKET.
What parts can replace 6-1AALT1PC30?
There are 8 known substitutes for 6-1AALT1PC30: S107-1, STI-702, 138C107H01 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6-1AALT1PC30?
6-1AALT1PC30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-256-1030. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6-1AALT1PC30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026