PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6-1-2330-20-162
6-1-2330-20-162 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET SET is a the manufacturer industrial component. Key specifications include document_type: ENGINEERING DRAWING, end_item_name: GEAR REDUCER, document_source: 29679, end_item_source: 29679, special_features: LAUNDRY,MOBILE,2 TRAILER TYPE TUMBLERS, document_identification: ML18. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-152-8258, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6-1-2330-20-162
NSN: 5330-00-152-8258
FSC: 5330
CAGE: 81337 — W1D1 NATICK SOLDIER CENTER DBA US ARMY CCDC SOLDIER CENTER DIV COMBAT CAPABILITIES DEVELOPMENT COMMAND - SOLDIER CENTER (USA)
SPECIFICATIONS
document_typeENGINEERING DRAWING
end_item_nameGEAR REDUCER
document_source29679
end_item_source29679
special_featuresLAUNDRY,MOBILE,2 TRAILER TYPE TUMBLERS
component_quantity3
document_identificationML18
end_item_identificationD.T.1119A A
component_document_originINDUSTRIAL
component_document_page_number1
NSN5330-00-152-8258
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6-1-2330-20-162 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DOCUMENT SOURCE: 29679
•
COMPONENT QUANTITY: 3
•
DOCUMENT IDENTIFICATION: ML18
•
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
•
COMPONENT DOCUMENT PAGE NUMBER: 1
•
END ITEM SOURCE: 29679
TECHNICAL CHARACTERISTICS (FLIS)
DOCUMENT SOURCE29679
COMPONENT QUANTITY3
DOCUMENT IDENTIFICATIONML18
SPECIAL FEATURESLAUNDRY,MOBILE,2 TRAILER TYPE TUMBLERS
END ITEM IDENTIFICATIOND.T.1119A A
COMPONENT DOCUMENT ORIGININDUSTRIAL
COMPONENT DOCUMENT PAGE NUMBER1
END ITEM SOURCE29679
END ITEM NAMEGEAR REDUCER
DOCUMENT TYPEENGINEERING DRAWING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
00-237-0978Interchangeable
interchangeable cross-reference
interchangeable
XU182Interchangeable
interchangeable cross-reference
interchangeable
AS954Interchangeable
interchangeable cross-reference
interchangeable
98MEA1Interchangeable
interchangeable cross-reference
interchangeable
12247Interchangeable
interchangeable cross-reference
interchangeable
285379Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6-1-2330-20-162?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6-1-2330-20-162?
6-1-2330-20-162 is a GASKET SET.
What parts can replace 6-1-2330-20-162?
There are 13 known substitutes for 6-1-2330-20-162: 00-237-0978, XU182, AS954 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6-1-2330-20-162?
6-1-2330-20-162 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-152-8258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6-1-2330-20-162

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026