PartsTable
Technical Data Sheet
PartsTable / MRO / 6-04401
6-04401 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include shape: ROUND, material: PLASTIC POLYCARBONATE LENS, cone_width: 1.1406 INCHES NOMINAL IN, lens_color: RED, bore_diameter: 3.6250 INCHES NOMINAL IN, overall_length: 3.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6-04401
NSN: 3110-00-100-3593
FSC: 3110
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
shapeROUND
materialPLASTIC POLYCARBONATE LENS
cone_width1.1406 INCHES NOMINAL IN
lens_colorRED
bore_diameter3.6250 INCHES NOMINAL IN
overall_length3.250 INCHES NOMINAL IN
mounting_methodTHREADED STUD(S)
overall_diameter4.125 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
features_providedLICENSE PLATE ILLUMINATION
lens_transparencyTRANSLUCENT
surface_treatmentENAMEL BODY
NSN3110-00-100-3593
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6-04401 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.1406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 3.6250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.1406 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
BORE DIAMETER3.6250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
60440-1Interchangeable
interchangeable cross-reference
interchangeable
42362Interchangeable
interchangeable cross-reference
interchangeable
C80308Interchangeable
interchangeable cross-reference
interchangeable
159705-101Interchangeable
interchangeable cross-reference
interchangeable
950486Interchangeable
interchangeable cross-reference
interchangeable
XM-36470-41-2700-O-LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6-04401?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6-04401?
6-04401 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6-04401?
There are 13 known substitutes for 6-04401: 60440-1, 42362, C80308 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6-04401?
6-04401 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6-04401

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026