PartsTable
Technical Data Sheet
PartsTable / MRO / 6-01320
6-01320 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL CORROSION RESISTING OVERALL, cup_width: 0.8750 INCHES NOMINAL IN, cone_width: 1.1772 INCHES NOMINAL IN, scale_type: CONCENTRIC DIAL, blade_width: 0.625 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN, design_form: DOUBLE-ENDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4149, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6-01320
NSN: 3110-00-100-4149
FSC: 3110
CAGE: 20361 — ELWELL-PARKER ELECTRIC CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
cup_width0.8750 INCHES NOMINAL IN
cone_width1.1772 INCHES NOMINAL IN
scale_typeCONCENTRIC DIAL
blade_width0.625 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
design_formDOUBLE-ENDED
design_typeFLUCTUATING
stem_length6.000 INCHES NOMINAL IN
bore_diameter1.6250 INCHES NOMINAL IN
dial_diameter1.750 INCHES NOMINAL IN
overall_width1.0938 INCHES NOMINAL IN
overall_length8.500 INCHES MINIMUM AND 9.000 INCHES MAXIMUM IN
NSN3110-00-100-4149
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6-01320 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 3.7500 INCHES NOMINAL IN
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0930 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
MATERIALSTEEL OVERALL
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER3.7500 INCHES NOMINAL IN
BORE DIAMETER1.6250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0930 INCHES NOMINAL IN
OVERALL WIDTH1.0938 INCHES NOMINAL IN
CONE WIDTH1.1772 INCHES NOMINAL IN
STANDOUT WIDTH0.2188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
6-01320Interchangeable
interchangeable cross-reference
interchangeable
161006GMAFFEDAAInterchangeable
interchangeable cross-reference
interchangeable
7197762Interchangeable
interchangeable cross-reference
interchangeable
63-8025Interchangeable
interchangeable cross-reference
interchangeable
55-6887Interchangeable
interchangeable cross-reference
interchangeable
5867556887Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6-01320?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6-01320?
6-01320 is a BEARING,ROLLER,TAPERED. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6-01320?
There are 17 known substitutes for 6-01320: 6-01320, 161006GMAFFEDAA, 7197762 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6-01320?
6-01320 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4149. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6-01320

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026