PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5YZ-913-71-1-22
5YZ-913-71-1-22 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, material: STEEL COMP 302 OVERALL, point_type: EXTENDED PRONG SQUARE CUT, hardness_rating: 55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL, style_designator: STANDARD, underloop_length: 1.125 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-202-8529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5YZ-913-71-1-22
NSN: 5315-01-202-8529
FSC: 5315
CAGE: 95169 — CURTISS-WRIGHT FLOW CONTROL CORPORATION DBA CURTISS-WRIGHT FLOW CONTROL CO DIV TARGET ROCK DIVISION (USA)
SPECIFICATIONS
diameter0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
materialSTEEL COMP 302 OVERALL
point_typeEXTENDED PRONG SQUARE CUT
hardness_rating55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
style_designatorSTANDARD
underloop_length1.125 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
departure_from_cited_documentMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
criticality_code_justificationZZZW
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-01-202-8529
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5YZ-913-71-1-22 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 302 OVERALL
•
STYLE DESIGNATOR: STANDARD
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
•
DIAMETER: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
POINT TYPE: EXTENDED PRONG SQUARE CUT
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
HARDNESS RATING: 55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 302 OVERALL
STYLE DESIGNATORSTANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
DEPARTURE FROM CITED DOCUMENTMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
DIAMETER0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
POINT TYPEEXTENDED PRONG SQUARE CUT
SURFACE TREATMENTPASSIVATE OVERALL
HARDNESS RATING55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
59D12Interchangeable
interchangeable cross-reference
interchangeable
12Z5056-16Interchangeable
interchangeable cross-reference
interchangeable
MR36-10Interchangeable
interchangeable cross-reference
interchangeable
MS24665-372Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5YZ-913-71-1-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5YZ-913-71-1-22?
5YZ-913-71-1-22 is a PIN,COTTER.
What parts can replace 5YZ-913-71-1-22?
There are 4 known substitutes for 5YZ-913-71-1-22: 59D12, 12Z5056-16, MR36-10 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5YZ-913-71-1-22?
5YZ-913-71-1-22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-202-8529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5YZ-913-71-1-22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026