PartsTable
Technical Data Sheet
Download PDF

5W5563 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5W5563: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL COMP 1015 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 3.750 INCHES NOMINAL IN, overall_length: 33.000 INCHES NOMINAL IN, material_thickness: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-654-8118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5W5563
NSN: 5340-00-654-8118
FSC: 5340 — Hardware, Commercial
CAGE: 62265 — VOLVO TRUCKS NORTH AMERICA, INC. DBA (FOREIGN PARENT IS VOLVO LASTVAGNAR AB, GOTEBORG, SWEDEN.) (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 1015 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
arch_quantity1
overall_width3.750 INCHES NOMINAL IN
overall_length33.000 INCHES NOMINAL IN
material_thickness0.375 INCHES NOMINAL IN
mounting_hole_size0.531 INCHES NOMINAL IN
inside_diameter/arch_length29.125 INCHES NOMINAL IN
distance_between_mounting_hole_centers31.875 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch7.625 INCHES NOMINAL IN
NSN5340-00-654-8118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5W5563 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.531 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 31.875 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
ARCH QUANTITY: 1
•
MATERIAL THICKNESS: 0.375 INCHES NOMINAL IN
•
CUSHION: NOT INCLUDED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.531 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS31.875 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
ARCH QUANTITY1
OVERALL LENGTH33.000 INCHES NOMINAL IN
OVERALL WIDTH3.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.375 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH7.625 INCHES NOMINAL IN
MATERIALSTEEL COMP 1015 LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 2
371663Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
N2351Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5W5563?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5W5563?
5W5563 is a STRAP,RETAINING.
What parts can replace 5W5563?
There are 2 known substitutes for 5W5563: 371663, N2351. Substitute compatibility should be verified for your specific system.
What is the NSN for 5W5563?
5W5563 is cataloged in the U.S. Government catalog under NSN 5340-00-654-8118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5W5563