PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5S4517
5S4517 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BAND, overall_width: 0.750 INCHES NOMINAL IN, style_designator: T-BOLT, loop_inside_diameter: 5.590 INCHES NOMINAL IN, end_item_identification: LOGISTICS SUPPORT VESSEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-191-6585, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5S4517
NSN: 5340-00-191-6585
FSC: 5340
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BAND
overall_width0.750 INCHES NOMINAL IN
style_designatorT-BOLT
loop_inside_diameter5.590 INCHES NOMINAL IN
end_item_identificationLOGISTICS SUPPORT VESSEL
NSN5340-00-191-6585
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5S4517 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
LOOP INSIDE DIAMETER: 5.590 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING BAND
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORT-BOLT
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
LOOP INSIDE DIAMETER5.590 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING BAND
OVERALL WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
J512Interchangeable
interchangeable cross-reference
interchangeable
0910126Interchangeable
interchangeable cross-reference
interchangeable
8M0118960Interchangeable
interchangeable cross-reference
interchangeable
14035 3Interchangeable
interchangeable cross-reference
interchangeable
14035A 3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5S4517?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5S4517?
5S4517 is a CLAMP,LOOP.
What parts can replace 5S4517?
There are 5 known substitutes for 5S4517: J512, 0910126, 8M0118960 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5S4517?
5S4517 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-191-6585. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5S4517

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026