PartsTable
Technical Data Sheet
Download PDF

5S28-20 — STUD,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5S28-20: STUD,TURNLOCK FASTENER.

The STUD,TURNLOCK FASTENER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, grip_length: 0.290 INCHES MINIMUM AND 0.304 INCHES MAXIMUM IN, head_length: 0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN, stud_head_height: 0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN, surface_treatment: NICKEL OVERALL, securing_device_type: WASHER. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-998-3575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5S28-20
NSN: 5325-00-998-3575
FSC: 5325 — Fastening Devices
CAGE: 71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
grip_length0.290 INCHES MINIMUM AND 0.304 INCHES MAXIMUM IN
head_length0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
stud_head_height0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN
surface_treatmentNICKEL OVERALL
securing_device_typeWASHER
turnlock_stud_head_styleFILLISTER WING
stud_shank_major_diameter0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
turnlock_stud_shank_styleSTUD SHANK
NSN5325-00-998-3575
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5S28-20 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD LENGTH: 0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
•
TURNLOCK STUD SHANK STYLE: STUD SHANK
•
STUD HEAD HEIGHT: 0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN
•
SECURING DEVICE TYPE: WASHER
•
TURNLOCK STUD HEAD STYLE: FILLISTER WING
•
STUD SHANK MAJOR DIAMETER: 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
HEAD LENGTH0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
TURNLOCK STUD SHANK STYLESTUD SHANK
STUD HEAD HEIGHT0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN
SECURING DEVICE TYPEWASHER
TURNLOCK STUD HEAD STYLEFILLISTER WING
STUD SHANK MAJOR DIAMETER0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
MATERIALSTEEL OVERALL
GRIP LENGTH0.290 INCHES MINIMUM AND 0.304 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
6020-77Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5S28-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5S28-20?
5S28-20 is a STUD,TURNLOCK FASTENER.
What parts can replace 5S28-20?
There is 1 known substitute for 5S28-20: 6020-77. Substitute compatibility should be verified for your specific system.
What is the NSN for 5S28-20?
5S28-20 is cataloged in the U.S. Government catalog under NSN 5325-00-998-3575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5S28-20