PartsTable
Technical Data Sheet
Download PDF

5P7471 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5P7471: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 49.50 MILLIMETERS MINIMUM AND 52.35 MILLIMETERS MAXIMUM MM, length: 109.5 MILLIMETERS MINIMUM AND 110.5 MILLIMETERS MAXIMUM MM, material: STEEL OVERALL, hole_diameter: 14.500 MILLIMETERS NOMINAL MM, mounting_method: UNTHREADED HOLE(S), material_thickness: 4.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-166-8109, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5P7471
NSN: 5340-01-166-8109
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
width49.50 MILLIMETERS MINIMUM AND 52.35 MILLIMETERS MAXIMUM MM
length109.5 MILLIMETERS MINIMUM AND 110.5 MILLIMETERS MAXIMUM MM
materialSTEEL OVERALL
hole_diameter14.500 MILLIMETERS NOMINAL MM
mounting_methodUNTHREADED HOLE(S)
material_thickness4.0 MILLIMETERS NOMINAL MM
material_document_and_classification1E166,CAGE11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
distance_from_end_to_hole_nearest_loop13.0 MILLIMETERS NOMINAL MM
NSN5340-01-166-8109
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5P7471 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 109.5 MILLIMETERS MINIMUM AND 110.5 MILLIMETERS MAXIMUM MM
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
DISTANCE FROM END TO HOLE NEAREST LOOP: 13.0 MILLIMETERS NOMINAL MM
•
MATERIAL DOCUMENT AND CLASSIFICATION: 1E166,CAGE11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 4.0 MILLIMETERS NOMINAL MM
•
WIDTH: 49.50 MILLIMETERS MINIMUM AND 52.35 MILLIMETERS MAXIMUM MM
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 14.500 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
LENGTH109.5 MILLIMETERS MINIMUM AND 110.5 MILLIMETERS MAXIMUM MM
MOUNTING METHODUNTHREADED HOLE(S)
DISTANCE FROM END TO HOLE NEAREST LOOP13.0 MILLIMETERS NOMINAL MM
MATERIAL DOCUMENT AND CLASSIFICATION1E166,CAGE11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS4.0 MILLIMETERS NOMINAL MM
WIDTH49.50 MILLIMETERS MINIMUM AND 52.35 MILLIMETERS MAXIMUM MM
MATERIALSTEEL OVERALL
HOLE DIAMETER14.500 MILLIMETERS NOMINAL MM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5P7471?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5P7471?
5P7471 is a CLIP,SPRING TENSION.
What is the NSN for 5P7471?
5P7471 is cataloged in the U.S. Government catalog under NSN 5340-01-166-8109. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5P7471

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.