PartsTable
Technical Data Sheet
Download PDF

5NCC1011P — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5NCC1011P: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.3120 INCHES NOMINAL IN, alignment_type: RIGID, surface_treatment: CADMIUM OVERALL, lubrication_material: GREASE, overall_outside_diameter: 0.3120 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-227-2790, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5NCC1011P
NSN: 3110-00-227-2790
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 3NPS1 — RBC AIRCRAFT PRODUCTS, INC. (USA)
SPECIFICATIONS
bore_diameter0.3120 INCHES NOMINAL IN
alignment_typeRIGID
surface_treatmentCADMIUM OVERALL
lubrication_materialGREASE
overall_outside_diameter0.3120 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-227-2790
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5NCC1011P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OVERALL OUTSIDE DIAMETER: 0.3120 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
SURFACE TREATMENT: CADMIUM OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.3120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OVERALL OUTSIDE DIAMETER0.3120 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SURFACE TREATMENTCADMIUM OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.3120 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
5NCC1011P2CReference document
Same NSN cross-reference
Reference document — Secondary reference
NAS506-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5NCC1011P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5NCC1011P?
5NCC1011P is a BEARING,ROLLER,NEEDLE.
What parts can replace 5NCC1011P?
There are 2 known substitutes for 5NCC1011P: 5NCC1011P2C, NAS506-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 5NCC1011P?
5NCC1011P is cataloged in the U.S. Government catalog under NSN 3110-00-227-2790. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5NCC1011P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.