PartsTable
Technical Data Sheet
Download PDF

5NB06 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5NB06: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL, outside_diameter: 5.812 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 4.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-197-9331, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5NB06
NSN: 5330-00-197-9331
FSC: 5330 — Packing and Gasket Materials
CAGE: 00736 — FALLS FILTRATION TECHNOLOGIES, INC. (USA)
SPECIFICATIONS
materialCORK AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL
outside_diameter5.812 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter4.250 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-C-576,TY 1A,CL 2 FED SPEC ALL MATERIAL RESPONSES OVERALL A
NSN5330-00-197-9331
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5NB06 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-C-576,TY 1A,CL 2 FED SPEC ALL MATERIAL RESPONSES OVERALL A
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 5.812 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.250 INCHES NOMINAL IN
•
MATERIAL: CORK AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-C-576,TY 1A,CL 2 FED SPEC ALL MATERIAL RESPONSES OVERALL A
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER5.812 INCHES NOMINAL IN
APERTURE DIAMETER4.250 INCHES NOMINAL IN
MATERIALCORK AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
3211274Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5NB06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5NB06?
5NB06 is a GASKET.
What parts can replace 5NB06?
There is 1 known substitute for 5NB06: 3211274. Substitute compatibility should be verified for your specific system.
What is the NSN for 5NB06?
5NB06 is cataloged in the U.S. Government catalog under NSN 5330-00-197-9331. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5NB06