PartsTable
Technical Data Sheet
Download PDF

5N1963 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5N1963: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.137 INCHES NOMINAL IN, diameter: 0.3693 INCHES MINIMUM AND 0.3699 INCHES MAXIMUM IN, material: STEEL COMP 430 OVERALL, head_style: DOUBLE CHAMFER, chamfer_length: 0.156 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-026-2822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5N1963
NSN: 5315-00-026-2822
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
height0.137 INCHES NOMINAL IN
diameter0.3693 INCHES MINIMUM AND 0.3699 INCHES MAXIMUM IN
materialSTEEL COMP 430 OVERALL
head_styleDOUBLE CHAMFER
chamfer_length0.156 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle25.0 DEGREES NOMINAL
pin_head_diameter0.625 INCHES NOMINAL IN
under_head_length1.170 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
first_hole_diameter0.078 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-026-2822
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5N1963 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.156 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.170 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.078 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.156 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.170 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
PIN CHAMFER ANGLE25.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.078 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.3693 INCHES MINIMUM AND 0.3699 INCHES MAXIMUM IN
HEAD STYLEDOUBLE CHAMFER
SUBSTITUTES & CROSS-REFERENCES 1
2N6421Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5N1963?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5N1963?
5N1963 is a PIN,STRAIGHT,HEADED.
What parts can replace 5N1963?
There is 1 known substitute for 5N1963: 2N6421. Substitute compatibility should be verified for your specific system.
What is the NSN for 5N1963?
5N1963 is cataloged in the U.S. Government catalog under NSN 5315-00-026-2822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5N1963

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.