PartsTable
Technical Data Sheet
PartsTable / O-RING / 5M.3882.220.01
5M.3882.220.01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 5M.3882.220.01 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-809-3816, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5M.3882.220.01
NSN: 5331-00-809-3816
FSC: 5331 — O-RING
CAGE: D1901 — HENSOLDT SENSORS GMBH DIV SEPS (DEU)
SPECIFICATIONS
Part Number5M.3882.220.01
NSN5331-00-809-3816
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5M.3882.220.01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 2.883 INCHES MINIMUM AND 2.943 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
TEMP RATING: -103.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.668 INCHES MINIMUM AND 2.698 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER2.883 INCHES MINIMUM AND 2.943 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
TEMP RATING-103.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.668 INCHES MINIMUM AND 2.698 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
MS90064-1Interchangeable
interchangeable cross-reference
interchangeable
ARP568-013MILP5 516-70DURMInterchangeable
interchangeable cross-reference
interchangeable
AA55549-10Interchangeable
interchangeable cross-reference
interchangeable
10375808Interchangeable
interchangeable cross-reference
interchangeable
5331PL0841416Interchangeable
interchangeable cross-reference
interchangeable
5-157Interchangeable
IBM 575 Watt Power Supply
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5M.3882.220.01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5M.3882.220.01?
5M.3882.220.01 is a 5M.3882.220.01.
What parts can replace 5M.3882.220.01?
There are 20 known substitutes for 5M.3882.220.01: MS90064-1, ARP568-013MILP5 516-70DURM, AA55549-10 and 17 more. Substitute compatibility should be verified for your specific system.
Is 5M.3882.220.01 still available?
5M.3882.220.01 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5M.3882.220.01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026