PartsTable
Technical Data Sheet
Download PDF

5L1100 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5L1100: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.0020 INCHES NOMINAL IN, overall_width: 0.0780 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-031-9372, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5L1100
NSN: 3110-01-031-9372
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.0020 INCHES NOMINAL IN
overall_width0.0780 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
end_item_identification3805-01-126-7895;GRADER,ROAD HWY SEC 130GS
overall_outside_diameter1.5520 INCHES NOMINAL IN
NSN3110-01-031-9372
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5L1100 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.5520 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.0020 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.0780 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.5520 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
END ITEM IDENTIFICATION3805-01-126-7895;GRADER,ROAD HWY SEC 130GS
BORE DIAMETER1.0020 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
11634622Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5L1100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5L1100?
5L1100 is a BEARING,ROLLER,NEEDLE.
What parts can replace 5L1100?
There is 1 known substitute for 5L1100: 11634622. Substitute compatibility should be verified for your specific system.
What is the NSN for 5L1100?
5L1100 is cataloged in the U.S. Government catalog under NSN 3110-01-031-9372. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5L1100

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.