PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5HS980
5HS980 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,FRICTION is a the manufacturer industrial component. Key specifications include length: 0.630 INCHES NOMINAL IN, diameter: 0.375 INCHES NOMINAL IN, special_features: MATERIAL; BRASS, style_designator: PRESSURE, end_item_identification: 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER), part_name_assigned_by_controlling_agency: CATCH-BULLET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-512-9840, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5HS980
NSN: 5340-01-512-9840
FSC: 5340
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
length0.630 INCHES NOMINAL IN
diameter0.375 INCHES NOMINAL IN
special_featuresMATERIAL; BRASS
style_designatorPRESSURE
end_item_identification2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER)
part_name_assigned_by_controlling_agencyCATCH-BULLET
NSN5340-01-512-9840
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5HS980 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: PRESSURE
•
LENGTH: 0.630 INCHES NOMINAL IN
•
DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER)
STYLE DESIGNATORPRESSURE
PART NAME ASSIGNED BY CONTROLLING AGENCYCATCH-BULLET
LENGTH0.630 INCHES NOMINAL IN
DIAMETER0.375 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL; BRASS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
545Interchangeable
interchangeable cross-reference
interchangeable
20800-1Interchangeable
interchangeable cross-reference
interchangeable
20800-82Interchangeable
interchangeable cross-reference
interchangeable
633969-7Interchangeable
interchangeable cross-reference
interchangeable
633969-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5HS980?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5HS980?
5HS980 is a CATCH,FRICTION.
What parts can replace 5HS980?
There are 5 known substitutes for 5HS980: 545, 20800-1, 20800-82 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5HS980?
5HS980 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-512-9840. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5HS980

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026