PartsTable
Technical Data Sheet
Download PDF

5H4832 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5H4832: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.521 INCHES MINIMUM AND 3.541 INCHES MAXIMUM IN, overall_length: 3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN, cross-sectional_thickness: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN, outside_edge_to_bolt_hole_center_distance_along_width: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, outside_edge_to_bolt_hole_center_distance_along_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-509-3159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5H4832
NSN: 5330-00-509-3159
FSC: 5330 — Packing and Gasket Materials
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
hole_diameter0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.521 INCHES MINIMUM AND 3.541 INCHES MAXIMUM IN
overall_length3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN
cross-sectional_thickness0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_width0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length3.115 INCHES MINIMUM AND 3.135 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-509-3159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5H4832 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.115 INCHES MINIMUM AND 3.135 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
OVERALL LENGTH3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN
OVERALL WIDTH3.521 INCHES MINIMUM AND 3.541 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.115 INCHES MINIMUM AND 3.135 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
HOLE DIAMETER0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5H4832?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5H4832?
5H4832 is a GASKET.
What is the NSN for 5H4832?
5H4832 is cataloged in the U.S. Government catalog under NSN 5330-00-509-3159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5H4832

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.