PartsTable
Technical Data Sheet
Download PDF

5F40-2112 NON-ASBESTOS — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5F40-2112 NON-ASBESTOS: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.750 INCHES NOMINAL IN, overall_length: 8.000 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIAL, inside_corner_radius: 0.812 INCHES NOMINAL IN, outside_corner_radius: 1.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-442-1866, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5F40-2112 NON-ASBESTOS
NSN: 5330-01-442-1866
FSC: 5330 — Packing and Gasket Materials
CAGE: 10855 — CARRIER CORP (USA)
SPECIFICATIONS
hole_diameter0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.750 INCHES NOMINAL IN
overall_length8.000 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIAL
inside_corner_radius0.812 INCHES NOMINAL IN
outside_corner_radius1.125 INCHES NOMINAL IN
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
material_document_and_classificationBLUE GARD 3000, CAGEC 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_bolt_holes_along_length0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-442-1866
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5F40-2112 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.812 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: BLUE GARD 3000, CAGEC 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.812 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONBLUE GARD 3000, CAGEC 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH8.000 INCHES NOMINAL IN
OVERALL WIDTH5.750 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIAL
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OUTSIDE CORNER RADIUS1.125 INCHES NOMINAL IN
HOLE DIAMETER0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5F40-2112 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5F40-2112 NON-ASBESTOS?
5F40-2112 NON-ASBESTOS is a GASKET.
What is the NSN for 5F40-2112 NON-ASBESTOS?
5F40-2112 NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-442-1866. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5F40-2112 NON-ASBESTOS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.