PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5D5157
5D5157 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.500 INCHES NOMINAL IN, aperture_width: 0.375 INCHES NOMINAL IN, overall_length: 2.562 INCHES NOMINAL IN, aperture_length: 2.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-610-6233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5D5157
NSN: 5330-00-610-6233
FSC: 5330
CAGE: 79500 — WESTINGHOUSE ELECTRIC CORP (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.500 INCHES NOMINAL IN
aperture_width0.375 INCHES NOMINAL IN
overall_length2.562 INCHES NOMINAL IN
aperture_length2.000 INCHES NOMINAL IN
fsc_application_dataHOUSINGS INDICATOR
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationNO.1925,FSCM 85005 MFR REF SINGLE MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.250 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-610-6233
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5D5157 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
APERTURE LENGTH: 2.000 INCHES NOMINAL IN
•
APERTURE WIDTH: 0.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.250 INCHES NOMINAL IN
MATERIALPAPER OVERALL
APERTURE LENGTH2.000 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
APERTURE WIDTH0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
FSC APPLICATION DATAHOUSINGS INDICATOR
HOLE DIAMETER0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
05-342Interchangeable
interchangeable cross-reference
interchangeable
EXD 6/1LInterchangeable
interchangeable cross-reference
interchangeable
048-769Interchangeable
interchangeable cross-reference
interchangeable
S16635Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5D5157?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5D5157?
5D5157 is a GASKET.
What parts can replace 5D5157?
There are 4 known substitutes for 5D5157: 05-342, EXD 6/1L, 048-769 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5D5157?
5D5157 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-610-6233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5D5157

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026