PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5CW930
5CW930 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.359 INCHES NOMINAL IN, special_features: TYPE TY 1 CASE TY 1A ELEMENT A, housing_bore_diameter: 2.718 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-769-8351, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5CW930
NSN: 5330-00-769-8351
FSC: 5330
CAGE: 28835 — HOBART BROS CO (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.359 INCHES NOMINAL IN
special_featuresTYPE TY 1 CASE TY 1A ELEMENT A
housing_bore_diameter2.718 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.750 INCHES NOMINAL IN
NSN5330-00-769-8351
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5CW930 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
SEAL WIDTH: 0.359 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.718 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
SEAL WIDTH0.359 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.718 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
MATERIALSTEEL CASE
MATERIALWOOL SEALING ELEMENT
CASE STYLESQUARE
SPECIAL FEATURESTYPE TY 1 CASE TY 1A ELEMENT A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
53568VInterchangeable
interchangeable cross-reference
interchangeable
JD7355Interchangeable
interchangeable cross-reference
interchangeable
449Interchangeable
interchangeable cross-reference
interchangeable
94190Interchangeable
interchangeable cross-reference
interchangeable
41623Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5CW930?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5CW930?
5CW930 is a SEAL,PLAIN ENCASED.
What parts can replace 5CW930?
There are 23 known substitutes for 5CW930: 53568V, JD7355, 449 and 20 more. Substitute compatibility should be verified for your specific system.
Is 5CW930 still available?
5CW930 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5CW930

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026