PartsTable
Technical Data Sheet
Download PDF

5C1-04804-10 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5C1-04804-10: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, thread_class: 2A A, screw_material: NICKEL ALLOY K-500 AND NICKEL ALLOY 502, fastener_length: 2.500 INCHES NOMINAL IN, locking_feature: PELLET, special_features: FLAT PT. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-470-5187, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5C1-04804-10
NSN: 5305-01-470-5187
FSC: 5305 — Screws
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
head_styleHEXAGON
thread_class2A A
screw_materialNICKEL ALLOY K-500 AND NICKEL ALLOY 502
fastener_length2.500 INCHES NOMINAL IN
locking_featurePELLET
special_featuresFLAT PT
thread_directionRIGHT-HAND
width_between_flats0.937 INCHES NOMINAL IN
end_item_identificationCAPSTAN ASSY
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch11
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-470-5187
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5C1-04804-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING FEATURE MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE
•
FASTENER LENGTH: 2.500 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.937 INCHES NOMINAL IN
•
LOCKING FEATURE: PELLET
TECHNICAL CHARACTERISTICS
LOCKING FEATURE MATERIAL DOCUMENT AND CLASSIFICATIONMIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE
FASTENER LENGTH2.500 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.937 INCHES NOMINAL IN
LOCKING FEATUREPELLET
SCREW MATERIALNICKEL ALLOY K-500 AND NICKEL ALLOY 502
SPECIAL FEATURESFLAT PT
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
5D3-03871 ITEM 49Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5C1-04804-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5C1-04804-10?
5C1-04804-10 is a SCREW,MACHINE.
What parts can replace 5C1-04804-10?
There is 1 known substitute for 5C1-04804-10: 5D3-03871 ITEM 49. Substitute compatibility should be verified for your specific system.
What is the NSN for 5C1-04804-10?
5C1-04804-10 is cataloged in the U.S. Government catalog under NSN 5305-01-470-5187. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5C1-04804-10