PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5B9714
5B9714 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, aperture_width: 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN, overall_length: 11.115 INCHES MINIMUM AND 11.135 INCHES MAXIMUM IN, inside_corner_radius: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, outside_corner_radius: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, cross-sectional_thickness: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-362-8074, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5B9714
NSN: 5330-00-362-8074
FSC: 5330
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
hole_diameter0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
aperture_width2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
overall_length11.115 INCHES MINIMUM AND 11.135 INCHES MAXIMUM IN
inside_corner_radius0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
outside_corner_radius0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
cross-sectional_thickness0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
inside_corner_inverted_radius0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_length3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-362-8074
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5B9714 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE CORNER INVERTED RADIUS: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
•
APERTURE WIDTH: 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE CORNER INVERTED RADIUS0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
APERTURE WIDTH2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
OVERALL LENGTH11.115 INCHES MINIMUM AND 11.135 INCHES MAXIMUM IN
HOLE DIAMETER0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
F600E208Interchangeable
interchangeable cross-reference
interchangeable
F600E00208Interchangeable
interchangeable cross-reference
interchangeable
25776Interchangeable
interchangeable cross-reference
interchangeable
025776Interchangeable
interchangeable cross-reference
interchangeable
MC1011PInterchangeable
interchangeable cross-reference
interchangeable
60208Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5B9714?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5B9714?
5B9714 is a GASKET.
What parts can replace 5B9714?
There are 9 known substitutes for 5B9714: F600E208, F600E00208, 25776 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5B9714?
5B9714 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-362-8074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5B9714

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026