The Shielding Gasket,electronic, cataloged under National Stock Number 5999-01-307-5715, is classified within Federal Supply Class 5999 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 27 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5999-01-307-5715 |
| Primary Part Number | MIL-DTL-83528/4 |
| Item Name | Shielding Gasket,electronic |
| FSC / FSG | 5999 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Specification/standard Data | 81349-MIL-G-83528/4 GOVERNMENT SPECIFICATION |
| Hole Diameter | 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-G-83528 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Cross-Sectional Shape Style | EMI |
| Environmental Protection Material Location | THROUGHOUT RF SHIELDING GASKET |
| Material | UNABLE TO DECODE |
| Material | UNABLE TO DECODE |
| Bolt Hole Quantity | 4 |
| Center to Center Distance Between Bolt Holes Along Length | 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN |
| Aperture Diameter | 2.500 INCHES MINIMUM AND 2.520 INCHES MAXIMUM IN |
| Outside Edge to Bolt Hole Center Distance Along Length | 0.268 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN |
| Center to Center Distance Between Bolt Holes Along Width | 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN |
| Precious Material | SILVER |
| Outside Edge to Bolt Hole Center Distance Along Width | 0.268 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN |
| Surface Treatment | UNABLE TO DECODE |
| Precious Material and Location | EMI/RFI CONDUCTIVE PARTICLES SILVER |
| Cross-Sectional Height | 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN |
| Outside Corner Radius | 0.379 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN |
| Style Designator | NON-CIRCULAR |
| Specification/standard Data | 81349-MIL-G-83528/4 GOVERNMENT SPECIFICATION |
| Hole Diameter | 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-G-83528 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Cross-Sectional Shape Style | EMI |
| Environmental Protection Material Location | THROUGHOUT RF SHIELDING GASKET |
| Material | UNABLE TO DECODE |
| Material | UNABLE TO DECODE |
| Bolt Hole Quantity | 4 |
| Acquisition Status | ACTIVE |
| Successor | 5999-01-373-4475 |
| HAZMAT | No |
| Shelf Life Code | 0 |
| Criticality Code | N |
| Unit of Issue | EA |
| SMR Code | ZN |
| Weight | 0.0440 lbs |
| Cube | 0.0014 cu ft |
| Part Number | Manufacturer |
|---|---|
| MIL-DTL-83528/4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M83528/004K032 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-G-83528/4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5999-01-307-5715 is a Shielding Gasket,electronic, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5999 (No Item Name Available). Status: active.
NSN 5999-01-307-5715 has 3 cross-referenced part numbers: MIL-DTL-83528/4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M83528/004K032 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-G-83528/4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 3 known substitutes for 5999-01-307-5715: 5999-01-513-6280, 5999-01-373-4475, 5999-01-391-1215. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-DTL-83528/4: Specification/standard Data: 81349-MIL-G-83528/4 GOVERNMENT SPECIFICATION; Hole Diameter: 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN; Test Data Document: 81349-MIL-G-83528 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Cross-Sectional Shape Style: EMI. 30 total characteristics are documented in the Federal Logistics Information System.