The Mounting Pad,electrical-Electron, cataloged under National Stock Number 5999-01-084-0860, is classified within Federal Supply Class 5999 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 8 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5999-01-084-0860 |
| Primary Part Number | MIL-M-38527/5 |
| Item Name | Mounting Pad,electrical-Electron |
| FSC / FSG | 5999 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 1 UNTHREADED HOLE(S) FOURTH MOUNTING FACILITY |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY |
| Material | PLASTIC DIALLYL PHTHALATE |
| Unthreaded Mounting Hole Diameter | 0.055 INCHES NOMINAL SECOND MOUNTING FACILITY IN |
| Unthreaded Mounting Hole Diameter | 0.025 INCHES NOMINAL FIRST MOUNTING FACILITY IN |
| Unthreaded Mounting Hole Diameter | 0.065 INCHES NOMINAL THIRD MOUNTING FACILITY IN |
| Unthreaded Mounting Hole Diameter | 0.145 INCHES NOMINAL FOURTH MOUNTING FACILITY IN |
| Mounting Facility Type and Quantity | 2 UNTHREADED HOLE(S) THIRD MOUNTING FACILITY |
| Test Data Document | 58536-A-A-55485 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Mounting Facility Type and Quantity | 10 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY |
| Material Document and Classification | MIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE |
| Specification/standard Data | 58536-A-A-55485/5 GOVERNMENT SPECIFICATION |
| Mounting Facility Type and Quantity | 1 UNTHREADED HOLE(S) FOURTH MOUNTING FACILITY |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY |
| Material | PLASTIC DIALLYL PHTHALATE |
| Unthreaded Mounting Hole Diameter | 0.055 INCHES NOMINAL SECOND MOUNTING FACILITY IN |
| Unthreaded Mounting Hole Diameter | 0.025 INCHES NOMINAL FIRST MOUNTING FACILITY IN |
| Unthreaded Mounting Hole Diameter | 0.065 INCHES NOMINAL THIRD MOUNTING FACILITY IN |
| Unthreaded Mounting Hole Diameter | 0.145 INCHES NOMINAL FOURTH MOUNTING FACILITY IN |
| Mounting Facility Type and Quantity | 2 UNTHREADED HOLE(S) THIRD MOUNTING FACILITY |
| Test Data Document | 58536-A-A-55485 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Mounting Facility Type and Quantity | 10 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY |
| Material Document and Classification | MIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE |
| Specification/standard Data | 58536-A-A-55485/5 GOVERNMENT SPECIFICATION |
| Acquisition Status | ACTIVE |
| Successor | 5999-01-142-3408 |
| HAZMAT | No |
| Shelf Life Code | 0 |
| Criticality Code | Q |
| Unit of Issue | EA |
| SMR Code | JZ |
| Weight | 0.0001 lbs |
| Cube | 0.0000 cu ft |
| Part Number | Manufacturer |
|---|---|
| MIL-M-38527/5 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 10335DAP | Ross Milton Co the (USA) |
| M38527/05-001D | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M38527/5-01D | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| A-A-55485/5 | Federal Commercial Item Description Promulgated by General Services Administration Washington DC (USA) |
| A-55485/05-001D | Federal Commercial Item Description Promulgated by General Services Administration Washington DC (USA) |
| 36000239-001 | Lockheed Martin Corporation (USA) |
| 538622-84 | Raytheon Company Dba Raytheon (USA) |
NSN 5999-01-084-0860 is a Mounting Pad,electrical-Electron, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5999 (No Item Name Available). Status: active.
NSN 5999-01-084-0860 has 8 cross-referenced part numbers: MIL-M-38527/5 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 10335DAP (Ross Milton Co the), M38527/05-001D (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M38527/5-01D (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), A-A-55485/5 (Federal Commercial Item Description Promulgated by General Services Administration Washington DC) and 3 more.
There are 12 known substitutes for 5999-01-084-0860: 5999-01-410-7765, 5999-00-233-7336, 5999-01-142-3408 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-M-38527/5: Overall Width: 0.370 INCHES NOMINAL IN; Overall Height: 0.120 INCHES NOMINAL IN; Mounting Facility Type and Quantity: 1 UNTHREADED HOLE(S) FOURTH MOUNTING FACILITY; Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY. 30 total characteristics are documented in the Federal Logistics Information System.