The Contact,electrical, cataloged under National Stock Number 5999-01-007-6660, is classified within Federal Supply Class 5999 (Miscellaneous Electrical and Electronic Components) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5999-01-007-6660 |
| Primary Part Number | M39029/17-172 |
| Item Name | Contact,electrical |
| FSC / FSG | 5999 / 59 — Miscellaneous Electrical and Electronic Components |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Pin Accommodation Length | 0.190 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Crimping Tool Identifying Number | 22520/2-01 |
| Surface Treatment Document and Classification | MIL-G-45204,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY AND CONTACT |
| Overall Diameter | 0.054 INCHES MINIMUM AND 0.0555 INCHES MAXIMUM IN |
| Precious Material | GOLD |
| Mounting Method | FORCE FIT |
| Pin Accommodation Diameter | 0.029 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| Style Designator | SOCKET CONTACT |
| Precious Material and Weight | 0.005 GOLD GRAINS, TROY |
| Surface Treatment | GOLD BODY AND CONTACT |
| Precious Material and Location | BODY AND CONTACT SURFACES GOLD |
| Test Data Document | 81349-MIL-C-39029/17 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Cable Entrance Diameter | 0.0335 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN |
| Material | COPPER ALLOY BODY |
| Material | COPPER ALLOY CONTACT |
| Terminal Type and Quantity | 1 CRIMP END OPPOSITE CONTACT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Shelf Life Code | 0 |
| Criticality Code | X |
| Unit of Issue | EA |
| Acquisition advice code | ZZ |
| Weight | 0.0005 lbs |
| Cube | 0.0000 cu ft |
| Part Number | Manufacturer |
|---|---|
| 81543-23 | Te Connectivity Corporation Dba Tyco Electronics Corporation Div Deutsch Products (USA) |
| M39029/17-172 PRIMARY | Sae International Dba Sae International (USA) |
| 3522 500 25294 | Thales Nederland (NLD) |
| Reference | Meaning |
|---|---|
| SAE AS39029/17 | 5/9 Secondary reference U.S. Government activity |
| M39029/17-172 | 5/9 Secondary reference U.S. Government activity |
| M39029/17-23-22 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS39029/17 | 3/1 Design control — primary reference Sae International Dba Sae International |
| 172M39029-17-23-22 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MIL-C-39029/17 | 5/9 Secondary reference U.S. Government activity |
| 5999PL0799302 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| BIN-172 | 5/1 Secondary reference Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| M39029/17-172 | 5/9 Secondary reference U.S. Government activity |
NSN 5999-01-007-6660 is a Contact,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5999, Miscellaneous Electrical and Electronic Components. Status: active.
NSN 5999-01-007-6660 has 3 manufacturer part numbers on file: 81543-23 (Te Connectivity Corporation Dba Tyco Electronics Corporation Div Deutsch Products), M39029/17-172 (Sae International Dba Sae International), 3522 500 25294 (Thales Nederland).
Key specifications for M39029/17-172: Pin Accommodation Length: 0.190 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Crimping Tool Identifying Number: 22520/2-01; Surface Treatment Document and Classification: MIL-G-45204,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY AND CONTACT; Overall Diameter: 0.054 INCHES MINIMUM AND 0.0555 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.