PartsTable TECHNICAL DATA SHEET
NSN 5999-01-007-2675Government record, cited

Contact, Electrical5999-01-007-2675

NSN 5999-01-007-2675 · NIIN 010072675 · Part number M39029/16-170
Sae International Dba Sae International · FSC 5999 — Miscellaneous Electrical and Electronic Components · FSG 59 — Electrical and Electronic Equipment Components · CAGE 0U583
Government record, cited
NSN 5999-01-007-2675 — this item is cataloged by the U.S. Government under National Stock Number 5999-01-007-2675. Manufacturer of record part number: M39029/16-170.
Also searched as  5999-01-007-2675 · 5999010072675 · NIIN 010072675 · 01-007-2675 · FSC 5999 Miscellaneous Electrical and Electronic Components · CAGE 0U583 · M39029/16-170 · SAE-AS39029/16 · MIL-C-39029/16 · BIN-170
Nearby stock numbers  ·
Features
  • Contact,electrical — FSC 5999
  • Pin Accommodation Length: 0.250 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
  • Crimping Tool Identifying Number: M22520/1-01
  • Surface Treatment Document and Classification: MIL-G-45204,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY AND CONTACT
  • Overall Diameter: 0.168 INCHES MINIMUM AND 0.1695 INCHES MAXIMUM IN
  • Precious Material: GOLD
  • Mounting Method: FORCE FIT
  • Pin Accommodation Diameter: 0.097 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
Identification
  • NSN: 5999-01-007-2675
  • NIIN: 010072675
  • FSC: 5999 — Miscellaneous Electrical and Electronic Components
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: M39029/16-170
  • Manufacturer: Sae International Dba Sae International
General Description

The Contact,electrical, cataloged under National Stock Number 5999-01-007-2675, is classified within Federal Supply Class 5999 (Miscellaneous Electrical and Electronic Components) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN5999-01-007-2675
Primary Part NumberM39029/16-170
Item NameContact,electrical
FSC / FSG5999 / 59 — Miscellaneous Electrical and Electronic Components
ManufacturerSae International Dba Sae International
StatusACTIVE
Pin Accommodation Length0.250 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
Crimping Tool Identifying NumberM22520/1-01
Surface Treatment Document and ClassificationMIL-G-45204,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY AND CONTACT
Overall Diameter0.168 INCHES MINIMUM AND 0.1695 INCHES MAXIMUM IN
Precious MaterialGOLD
Mounting MethodFORCE FIT
Pin Accommodation Diameter0.097 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
Style DesignatorSOCKET CONTACT
Precious Material and Weight0.005 GOLD GRAINS, TROY
Surface TreatmentGOLD BODY AND CONTACT
Precious Material and LocationBODY AND CONTACT SURFACES GOLD
Test Data Document81349-MIL-C-39029 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Cable Entrance Diameter0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
MaterialCOPPER ALLOY BODY
MaterialCOPPER ALLOY CONTACT
Terminal Type and Quantity1 CRIMP END OPPOSITE CONTACT
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Shelf Life Code0
Criticality CodeX
Unit of IssueEA
Acquisition advice codeZZ
Weight0.0050 lbs
Cube0.0005 cu ft
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5999-01-007-6659M39029/16-167 POSSIBLE MATCH
CONTACT,ELECTRICAL
Possible match (shared part number)Sae International Dba Sae International
5999-01-041-6616M39029/16-168 POSSIBLE MATCH
CONTACT,ELECTRICAL
Possible match (shared part number)Sae International Dba Sae International
5999-01-140-1567M39029/16-166 POSSIBLE MATCH
CONTACT,ELECTRICAL
Possible match (shared part number)Sae International Dba Sae International
Cross-Reference Index
Part NumberManufacturer
M39029/16-170 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
SAE-AS39029/16 3/1 Design control — primary reference
Sae International Dba Sae International
MIL-C-39029/16 5/9 Secondary reference
U.S. Government activity
BIN-170 5/1 Secondary reference
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
M39029/16-170 5/9 Secondary reference
U.S. Government activity
M39029/16-12-12 5/9 Secondary reference
U.S. Government activity
Related Parts
5999-01-007-6659POSSIBLE MATCH
CONTACT,ELECTRICAL
M39029/16-167
5999-01-041-6616POSSIBLE MATCH
CONTACT,ELECTRICAL
M39029/16-168
5999-01-140-1567POSSIBLE MATCH
CONTACT,ELECTRICAL
M39029/16-166

Frequently Asked Questions

What is NSN 5999-01-007-2675?

NSN 5999-01-007-2675 is a Contact,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5999, Miscellaneous Electrical and Electronic Components. Status: active.

What part numbers are listed for NSN 5999-01-007-2675?

NSN 5999-01-007-2675 has 1 manufacturer part number on file: M39029/16-170 (Sae International Dba Sae International).

What NSN replaces 5999-01-007-2675?

3 possible matches (shared part number, not a government interchangeability claim): 5999-01-007-6659, 5999-01-041-6616, 5999-01-140-1567. Verify interchangeability with system specifications before substitution.

What are the specifications of M39029/16-170?

Key specifications for M39029/16-170: Pin Accommodation Length: 0.250 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN; Crimping Tool Identifying Number: M22520/1-01; Surface Treatment Document and Classification: MIL-G-45204,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY AND CONTACT; Overall Diameter: 0.168 INCHES MINIMUM AND 0.1695 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.

Is NSN 5999-01-007-2675 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com