PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 599847
599847 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.750 INCHES NOMINAL IN, housing_bore_diameter: 4.626 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.1875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-7833, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
599847
NSN: 5330-00-171-7833
FSC: 5330
CAGE: 11862 — GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.750 INCHES NOMINAL IN
housing_bore_diameter4.626 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.1875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-171-7833
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 599847 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 4.626 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
SEAL WIDTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 3.1875 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER4.626 INCHES NOMINAL IN
CASE STYLERECESSED
SEAL WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER3.1875 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
5850Interchangeable
interchangeable cross-reference
interchangeable
5-850-3-8Interchangeable
interchangeable cross-reference
interchangeable
GGC418TYPE1CLASSASIZE1Interchangeable
interchangeable cross-reference
interchangeable
F600I211Interchangeable
interchangeable cross-reference
interchangeable
5851Interchangeable
interchangeable cross-reference
interchangeable
S64132Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 599847?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 599847?
599847 is a SEAL,PLAIN ENCASED.
What parts can replace 599847?
There are 15 known substitutes for 599847: 5850, 5-850-3-8, GGC418TYPE1CLASSASIZE1 and 12 more. Substitute compatibility should be verified for your specific system.
Is 599847 still available?
599847 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 599847

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026