PartsTable TECHNICAL DATA SHEET
NSN 5998-01-246-3449Government record, cited

Retainer-Ejector, Electrical Card5998-01-246-3449

NSN 5998-01-246-3449 · NIIN 012463449 · Part number 225-CR-3.80-HR
Schroff Inc · FSC 5998 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware · FSG 59 — Electrical and Electronic Equipment Components · CAGE 61081
Government record, cited
NSN 5998-01-246-3449 — this item is cataloged by the U.S. Government under National Stock Number 5998-01-246-3449. Manufacturer of record part number: 225-CR-3.80-HR.
Also searched as  5998-01-246-3449 · 5998012463449 · NIIN 012463449 · 01-246-3449 · FSC 5998 Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware · CAGE 61081 · 225-CR-3.80-HR · 5924697-1
Nearby stock numbers  ·
Features
  • Retainer-Ejector,electrical Card — FSC 5998
  • Mounting Facility Type and Quantity: 2 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
  • Surface Treatment Document and Classification: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
  • Unthreaded Mounting Hole Diameter: 0.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
  • Material Document and Classification: QQ-A-200/8,6061-T6 FED SPEC SINGLE MATERIAL RESPONSE
  • Surface Treatment: CHROMATE
  • Material: ALUMINUM ALLOY
  • 1 manufacturer part number on file
Identification
  • NSN: 5998-01-246-3449
  • NIIN: 012463449
  • FSC: 5998 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 225-CR-3.80-HR
  • Manufacturer: Schroff Inc
General Description

The Retainer-Ejector,electrical Card, cataloged under National Stock Number 5998-01-246-3449, is classified within Federal Supply Class 5998 (Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Schroff Inc. Government technical data includes 6 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN5998-01-246-3449
Primary Part Number225-CR-3.80-HR
Item NameRetainer-Ejector,electrical Card
FSC / FSG5998 / 59 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
ManufacturerSchroff Inc
StatusACTIVE
Mounting Facility Type and Quantity2 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
Surface Treatment Document and ClassificationMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
Unthreaded Mounting Hole Diameter0.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Material Document and ClassificationQQ-A-200/8,6061-T6 FED SPEC SINGLE MATERIAL RESPONSE
Surface TreatmentCHROMATE
MaterialALUMINUM ALLOY
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Shelf Life Code0
Criticality CodeX
Unit of IssueEA
Acquisition advice codeJ
Weight1.0000 lbs
Cube0.0434 cu ft
Cross-Reference Index
Part NumberManufacturer
225-CR-3.80-HR PRIMARY Schroff Inc (USA)
Reference documents
ReferenceMeaning
225-CR-3.80-HR 3/9 Design control — primary reference
Calmark Corporation
5924697-1 C/1 Advisory reference — outside the item-of-supply concept
Naval Sea Systems Command

Frequently Asked Questions

What is NSN 5998-01-246-3449?

NSN 5998-01-246-3449 is a Retainer-Ejector,electrical Card, manufactured by Schroff Inc, classified under FSC 5998, Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware. Status: active.

What part numbers are listed for NSN 5998-01-246-3449?

NSN 5998-01-246-3449 has 1 manufacturer part number on file: 225-CR-3.80-HR (Schroff Inc).

What are the specifications of 225-CR-3.80-HR?

Key specifications for 225-CR-3.80-HR: Mounting Facility Type and Quantity: 2 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY; Overall Height: 0.225 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE; Unthreaded Mounting Hole Diameter: 0.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN. 6 specifications are documented in the U.S. Government catalog.

Is NSN 5998-01-246-3449 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com