PartsTable
Technical Data Sheet
599769-7 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 2.189 INCHES MINIMUM AND 2.251 INCHES MAXIMUM IN, inside_diameter_length: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 1.955 INCHES MINIMUM AND 1.975 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-687-1148, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
599769-7
NSN: 5340-00-687-1148
FSC: 5340
CAGE: 58250 — BALLANTYNE OF OMAHA INC. (USA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter2.189 INCHES MINIMUM AND 2.251 INCHES MAXIMUM IN
inside_diameter_length0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed1.955 INCHES MINIMUM AND 1.975 INCHES MAXIMUM IN
NSN5340-00-687-1148
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 599769-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: PLASTIC
DESIGN TYPE: FRICTION
INSIDE DIAMETER LENGTH: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.955 INCHES MINIMUM AND 1.975 INCHES MAXIMUM IN
OVERALL DIAMETER: 2.189 INCHES MINIMUM AND 2.251 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC
DESIGN TYPEFRICTION
INSIDE DIAMETER LENGTH0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.955 INCHES MINIMUM AND 1.975 INCHES MAXIMUM IN
OVERALL DIAMETER2.189 INCHES MINIMUM AND 2.251 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
6971-0014Upgraded Successor
successor cross-reference
successor
MS90376-12RBUpgraded Successor
successor cross-reference
successor
M85049/138-24CUpgraded Successor
successor cross-reference
successor
6972-0012Upgraded Successor
successor cross-reference
successor
M85049/138-22CUpgraded Successor
successor cross-reference
successor
M85049/138-20CUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 599769-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 599769-7?
599769-7 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 599769-7?
There are 15 known substitutes for 599769-7: 6971-0014, MS90376-12RB, M85049/138-24C and 12 more. Substitute compatibility should be verified for your specific system.
Is 599769-7 still available?
599769-7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 599769-7