PartsTable
Technical Data Sheet
Download PDF

59915K276 — ROD END,BALL JOINT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

59915K276: ROD END,BALL JOINT.

The ROD END,BALL JOINT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C STUD END, overall_length: 3.32 INCHES NOMINAL IN, thread_direction: RIGHT-HAND SHANK, nominal_thread_size: 0.50 INCHES SHANK IN, thread_quantity_per_inch: E10 SHANK, unthreaded_end_outside_diameter: 1.3125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-664-5236, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
59915K276
NSN: 5340-01-664-5236
NIINs: 016645236, 017189533
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL COMP 440C STUD END
overall_length3.32 INCHES NOMINAL IN
thread_directionRIGHT-HAND SHANK
nominal_thread_size0.50 INCHES SHANK IN
thread_quantity_per_inchE10 SHANK
unthreaded_end_outside_diameter1.3125 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyRIGHT-HAND THREAD BALL JOINT ROD END
NSN5340-01-664-5236
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 59915K276 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNTHREADED END OUTSIDE DIAMETER: 1.3125 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND SHANK
•
NOMINAL THREAD SIZE: 0.50 INCHES SHANK IN
•
THREAD QUANTITY PER INCH: E10 SHANK
•
MATERIAL: STEEL COMP 303 BODY
TECHNICAL CHARACTERISTICS
UNTHREADED END OUTSIDE DIAMETER1.3125 INCHES NOMINAL IN
OVERALL LENGTH3.32 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND SHANK
NOMINAL THREAD SIZE0.50 INCHES SHANK IN
PART NAME ASSIGNED BY CONTROLLING AGENCYRIGHT-HAND THREAD BALL JOINT ROD END
THREAD QUANTITY PER INCHE10 SHANK
MATERIALSTEEL COMP 303 BODY
MATERIALSTEEL COMP 440C STUD END
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 59915K276?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 59915K276?
59915K276 is a ROD END,BALL JOINT.
What is the NSN for 59915K276?
59915K276 is cataloged in the U.S. Government catalog under NSN 5340-01-664-5236. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 59915K276

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.