The Synchro,control Transformer, cataloged under National Stock Number 5990-01-213-6319, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-01-213-6319 |
| Primary Part Number | 1802884-151 |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Body Size | 15 |
| Shaft Type | SPLINE W/THREADS SINGLE SHAFT |
| Shaft Radial Play Test Point | 0.125 INCHES NOMINAL IN |
| Zrs Impedance Angle in Deg | 12.00 MINIMUM AND 20.00 MAXIMUM |
| Flange Diameter | 1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN |
| Undercut Width | 0.0730 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM IN |
| Shaft Diameter | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT IN |
| Length | 0.1070 INCHES MINIMUM AND 0.1270 INCHES MAXIMUM SHOULDER IN |
| Body Style | STANDARD ROUND B |
| Shaft Radial Play Determining Weight | 8.0 OUNCES OZ |
| Zrs Impedance Magnitude in Ohms | 1475.00 NOMINAL |
| Flange Thickness | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN |
| Stator Input Current Rating | 13.0 MILLIAMPERES MAXIMUM |
| Alignment Hole Bolt Circle Diameter | 1.0970 INCHES MINIMUM AND 1.1030 INCHES MAXIMUM IN |
| Spline Tooth Quantity | 21 SINGLE SHAFT |
| Shaft Thread Length | 0.2000 INCHES NOMINAL SINGLE SHAFT IN |
| Phase Shift Angle in Deg | 9.000 INPUT TO OUTPUT NOMINAL |
| Mounting Surface to Terminal End Distance | 2.5180 INCHES MAXIMUM IN |
| Frequency in Hertz | 60.0 NOMINAL |
| Stator Input Electrical Power Rating | 210.0 MILLIWATTS MAXIMUM |
| Terminal Location | REAR |
| Shaft End Play Determining Weight | 16.0 OUNCES OZ |
| Shaft Maximum Radial Play | 0.0006 INCHES IN |
| Alignment Hole Quantity | 4 |
| Zso Impedance Angle in Deg | 76.00 MINIMUM AND 84.00 MAXIMUM |
| Shaft Length | 0.5450 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM SINGLE SHAFT IN |
| Pilot Diameter | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN |
| Spline Tooth Diametral Pitch | 120 SINGLE SHAFT |
| Zso Impedance Magnitude in Ohms | 6250.00 NOMINAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| VCT15-6D2-96 | General Dynamics Motion Control Llc (USA) |
| 1802884-151 PRIMARY | Northrop Grumman Systems Corporation (USA) |
| Reference | Meaning |
|---|---|
| 2563150-5013 | 5/2 Secondary reference U.S. Government activity |
NSN 5990-01-213-6319 is a Synchro,control Transformer, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5990, Synchros and Resolvers. Status: active.
NSN 5990-01-213-6319 has 2 manufacturer part numbers on file: VCT15-6D2-96 (General Dynamics Motion Control Llc), 1802884-151 (Northrop Grumman Systems Corporation).
Key specifications for 1802884-151: Body Size: 15; Shaft Type: SPLINE W/THREADS SINGLE SHAFT; Shaft Radial Play Test Point: 0.125 INCHES NOMINAL IN; Zrs Impedance Angle in Deg: 12.00 MINIMUM AND 20.00 MAXIMUM. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.