The Resolver,electrical, cataloged under National Stock Number 5990-01-049-3695, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is J & W Servo Systems Co, Inc. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-01-049-3695 |
| Primary Part Number | 6152838 |
| Item Name | Resolver,electrical |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Manufacturer | J & W Servo Systems Co, Inc |
| Status | ACTIVE |
| Body Size | 23 |
| Shaft Type | ROUND, THREADED SINGLE SHAFT |
| Body Diameter | 1.9900 INCHES MAXIMUM IN |
| Flange Diameter | 2.2500 INCHES NOMINAL IN |
| Shaft Diameter | 0.2405 INCHES NOMINAL SINGLE SHAFT IN |
| Length | 0.2500 INCHES NOMINAL SHOULDER IN |
| Fragility Factor | MODERATELY RUGGED |
| Body Style | STANDARD ROUND D |
| Flange Thickness | 0.2500 INCHES NOMINAL IN |
| Stator Input Current Rating | 90.0 AMPERES NOMINAL |
| Shaft Thread Length | 0.3100 INCHES NOMINAL SINGLE SHAFT IN |
| Aft of First Flange Diameter | 1.9900 INCHES NOMINAL IN |
| Mounting Surface to Terminal End Distance | 3.5760 INCHES MAXIMUM IN |
| Frequency in Hertz | 400.0 NOMINAL |
| Stator Input Electrical Power Rating | 11.0 WATTS NOMINAL |
| Plus J Zso Reactance in Ohms | 24500.00 NOMINAL |
| Terminal Location | REAR |
| Shaft Length | 0.7190 INCHES NOMINAL SINGLE SHAFT IN |
| Pilot Diameter | 0.6200 INCHES NOMINAL IN |
| Second Shoulder Length | 0.1700 INCHES NOMINAL IN |
| Shoulder Diameter | 1.9900 INCHES NOMINAL IN |
| Shaft Nominal Thread Size | 0.250 INCHES SINGLE SHAFT IN |
| Stator Input Voltage Rating in Volts | 115.0 NOMINAL |
| Shaft Thread Direction | RIGHT-HAND SINGLE SHAFT |
| Pilot Length | 0.0450 INCHES NOMINAL IN |
| Shaft Thread Series Designator | UNF SINGLE SHAFT |
| Zso Resistance in Ohms | 4600.00 NOMINAL |
| Electrical Error Angular Range in Minutes | -10.0 TO 10.0 |
| Actuator Friction Torque at Plus 25 Deg Celsius | 4.00 INCH-OUNCES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 6152838 | J & W Servo Systems Co, Inc (USA) |
| Reference | Meaning |
|---|---|
| TSN23-64NHR2 | 5/9 Secondary reference General Dynamics Motion Control Llc |
| 6152838 | 7/2 Vendor item drawing reference Naval Sea Systems Command |
| 000-040392-01 | 3/9 Design control — primary reference General Dynamics Motion Control Llc |
| 5990PL0944720 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| VTSN23-64NHR2 | 5/9 Secondary reference General Dynamics Motion Control Llc |
NSN 5990-01-049-3695 is a Resolver,electrical, manufactured by J & W Servo Systems Co, Inc, classified under FSC 5990, Synchros and Resolvers. Status: active.
NSN 5990-01-049-3695 has 1 manufacturer part number on file: 6152838 (J & W Servo Systems Co, Inc).
Key specifications for 6152838: Body Size: 23; Shaft Type: ROUND, THREADED SINGLE SHAFT; Body Diameter: 1.9900 INCHES MAXIMUM IN; Flange Diameter: 2.2500 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5990-01-049-3695 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.