The Resolver,electrical,linear, cataloged under National Stock Number 5990-01-028-9595, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-01-028-9595 |
| Item Name | Resolver,electrical,linear |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Status | ACTIVE |
| Body Size | 8 |
| Shaft Type | ROUND, SLOTTED BOTH SHAFTS |
| Flange Diameter | 0.7500 INCHES NOMINAL IN |
| Undercut Width | 0.0620 INCHES NOMINAL IN |
| Shaft Diameter | 0.0900 INCHES NOMINAL BOTH SHAFTS IN |
| Rotor DC Resistance in Ohms | 30.00 NOMINAL |
| Undercut Diameter | 0.6910 INCHES NOMINAL IN |
| Body Style | STANDARD ROUND A |
| Flange Thickness | 0.0620 INCHES NOMINAL IN |
| Torque Gradient Per Angular Deg | 2400.0 MILLIMETER-MILLIGRAMS NOMINAL MM |
| Rotor Input Electrical Power Rating | 336.0 MILLIWATTS NOMINAL |
| Phase Shift Angle in Deg | 6.800 INPUT TO OUTPUT NOMINAL |
| Mounting Surface to Terminal End Distance | 1.0700 INCHES MAXIMUM IN |
| Frequency in Hertz | 400.0 NOMINAL |
| Zro Resistance in Ohms | 1400.00 NOMINAL |
| Plus J Zso Reactance in Ohms | 79.00 NOMINAL |
| Zrs Resistance in Ohms | 1500.00 NOMINAL |
| Terminal Location | SIDE |
| Rotor Input Voltage Rating in Volts | 115.0 NOMINAL |
| Shaft Length | 0.0620 INCHES NOMINAL REAR SHAFT IN |
| Shaft Length | 0.3750 INCHES NOMINAL FRONT SHAFT IN |
| Pilot Diameter | 0.5000 INCHES NOMINAL IN |
| Maximum Fundamental Null Voltage in Millivolts Per Volt | 20.00 INPUT |
| Maximum Linear Range in Deg | -30.0 TO 30.0 |
| Maximum Total Null Voltage Output in Millivolts Per Volt | 10.00 |
| Shaft Slot Width | 0.0250 INCHES NOMINAL SINGLE SHAFT IN |
| Plus J Zro Reactance in Ohms | 7300.00 NOMINAL |
| Transformation Ratio | 0.087 ROTOR TO STATOR NOMINAL |
| Pilot Length | 0.0400 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL Q — CCL Item — Commerce Control List |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CM41028001 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5990-01-028-9595 is a Resolver,electrical,linear, classified under FSC 5990, Synchros and Resolvers. Status: active.
Key specifications for 5990-01-028-9595: Body Size: 8; Shaft Type: ROUND, SLOTTED BOTH SHAFTS; Flange Diameter: 0.7500 INCHES NOMINAL IN; Undercut Width: 0.0620 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5990-01-028-9595 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.