The Synchro,control Transformer, cataloged under National Stock Number 5990-01-019-6609, is classified within Federal Supply Class 5990 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Atlantic Inertial Systems Inc. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 7 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-01-019-6609 |
| Primary Part Number | 11594 |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — No Item Name Available |
| Manufacturer | Atlantic Inertial Systems Inc |
| Status | ACTIVE |
| Rotor DC Resistance in Ohms | 440.00 NOMINAL |
| Shaft Type | ROUND, SLOTTED SINGLE SHAFT |
| Transformation Ratio | 2.203 ROTOR TO STATOR NOMINAL |
| Shaft Slot Depth | 0.0300 INCHES NOMINAL SINGLE SHAFT IN |
| Zro Resistance in Ohms | 720.00 NOMINAL |
| Frequency in Hertz | 400.0 NOMINAL |
| Phase Shift Angle in Deg | 8.500 INPUT TO OUTPUT NOMINAL |
| Maximum Total Null Voltage Output in Millivolts Per Volt | 50.00 |
| Stator Input Voltage Rating in Volts | 11.8 NOMINAL |
| Plus J Zro Reactance in Ohms | 3550.00 NOMINAL |
| Material | ALUMINUM ALLOY BODY |
| Actuator Friction Torque at Minus 55 Deg Celsius | 9.00 CENTIMETER-GRAMS NOMINAL CM |
| Stator DC Resistance in Ohms | 124.00 NOMINAL |
| Pilot Length | 0.0400 INCHES NOMINAL IN |
| Shaft Diameter | 0.0900 INCHES NOMINAL SINGLE SHAFT IN |
| Plus J Zrs Reactance in Ohms | 390.00 NOMINAL |
| Stator Input Electrical Power Rating | 35.0 MILLIWATTS NOMINAL |
| Plus J Zso Reactance in Ohms | 640.00 NOMINAL |
| Terminal Location | REAR |
| Terminal Type and Quantity | 5 WIRE LEAD |
| Actuator Friction Torque at Plus 25 Deg Celsius | 3.00 CENTIMETER-GRAMS NOMINAL CM |
| Shaft Length | 0.3750 INCHES NOMINAL SINGLE SHAFT IN |
| Mounting Surface to Terminal End Distance | 1.2400 INCHES MAXIMUM IN |
| Electrical Error Angular Range in Minutes | -10.0 TO 10.0 |
| Shaft Slot Width | 0.0250 INCHES NOMINAL SINGLE SHAFT IN |
| Zso Resistance in Ohms | 145.00 NOMINAL |
| Body Size | 8 |
| Stator Input Current Rating | 18.0 MILLIAMPERES NOMINAL |
| Zrs Resistance in Ohms | 1070.00 NOMINAL |
| Flange Diameter | 0.7500 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 5990-01-019-6609 is a Synchro,control Transformer, manufactured by Atlantic Inertial Systems Inc, classified under FSC 5990 (No Item Name Available). Status: active.
NSN 5990-01-019-6609 has 2 cross-referenced part numbers: 11594 (Atlantic Inertial Systems Inc), 11594 (Atlantic Inertial Systems Inc Div Cheshire Division).
There are 7 known substitutes for 5990-01-019-6609: 1660-00-065-8208, 5340-00-222-8562, 2520-00-508-1566 and 4 more. Verify interchangeability with system specifications before substitution.
Key specifications for 11594: Rotor DC Resistance in Ohms: 440.00 NOMINAL; Shaft Type: ROUND, SLOTTED SINGLE SHAFT; Transformation Ratio: 2.203 ROTOR TO STATOR NOMINAL; Shaft Slot Depth: 0.0300 INCHES NOMINAL SINGLE SHAFT IN. 30 total characteristics are documented in the Federal Logistics Information System.