PartsTable TECHNICAL DATA SHEET
NSN 5990-00-945-1033Government record, cited

Synchro, Transmitter5990-00-945-1033

NSN 5990-00-945-1033 · NIIN 009451033 · Part number 102622
L3harris Technologies, Inc Div Space & Airborne Systems · FSC 5990 — Synchros and Resolvers · FSG 59 — Electrical and Electronic Equipment Components · CAGE 24930
Government record, cited
NSN 5990-00-945-1033 — this item is cataloged by the U.S. Government under National Stock Number 5990-00-945-1033. Manufacturer of record part number: 102622.
Also searched as  5990-00-945-1033 · 5990009451033 · NIIN 009451033 · 00-945-1033 · FSC 5990 Synchros and Resolvers · CAGE 24930 · 102622
Nearby stock numbers  ·
Features
  • Synchro,transmitter — FSC 5990
  • Body Size: 15
  • Shaft Type: SPLINE W/THREADS SINGLE SHAFT
  • Flange Diameter: 1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN
  • Undercut Width: 0.0780 INCHES NOMINAL IN
  • Shaft Diameter: 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT IN
  • Undercut Diameter: 1.3120 INCHES NOMINAL IN
  • Length: 0.1320 INCHES NOMINAL SHOULDER IN
Identification
  • NSN: 5990-00-945-1033
  • NIIN: 009451033
  • FSC: 5990 — Synchros and Resolvers
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 102622
  • Manufacturer: L3harris Technologies, Inc Div Space & Airborne Systems
General Description

The Synchro,transmitter, cataloged under National Stock Number 5990-00-945-1033, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is L3harris Technologies, Inc Div Space & Airborne Systems. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5990-00-945-1033
Primary Part Number102622
Item NameSynchro,transmitter
FSC / FSG5990 / 59 — Synchros and Resolvers
ManufacturerL3harris Technologies, Inc Div Space & Airborne Systems
StatusACTIVE
Body Size15
Shaft TypeSPLINE W/THREADS SINGLE SHAFT
Flange Diameter1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN
Undercut Width0.0780 INCHES NOMINAL IN
Shaft Diameter0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT IN
Undercut Diameter1.3120 INCHES NOMINAL IN
Length0.1320 INCHES NOMINAL SHOULDER IN
Body StyleSTANDARD ROUND C
Flange Thickness0.0930 INCHES NOMINAL IN
Torque Gradient Per Angular Deg0.070 INCH-OUNCES MAXIMUM IN
Rotor Input Electrical Power Rating1.0 WATTS NOMINAL
Alignment Hole Bolt Circle Diameter1.1000 INCHES NOMINAL IN
Zro Impedance Angle in Deg81.40 MINIMUM AND 84.60 MAXIMUM
Spline Tooth Quantity21 SINGLE SHAFT
Shaft Thread Length0.2000 INCHES NOMINAL SINGLE SHAFT IN
Phase Shift Angle in Deg4.000 INPUT TO OUTPUT NOMINAL
Mounting Surface to Terminal End Distance1.7720 INCHES NOMINAL IN
Frequency in Hertz400.0 NOMINAL
Terminal LocationREAR
Rotor Input Voltage Rating in Volts115.0 NOMINAL
Alignment Hole Quantity4
Zso Impedance Angle in Deg26.50 MINIMUM AND 31.50 MAXIMUM
Shaft Length0.5400 INCHES NOMINAL SINGLE SHAFT IN
Body MaterialSTEEL CORROSION RESISTING
Pilot Diameter0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
Spline Tooth Diametral Pitch120 SINGLE SHAFT
Zso Impedance Magnitude in Ohms123.00 MINIMUM AND 138.00 MAXIMUM
Maximum Fundamental Null Voltage in Millivolts Per Volt32.00 OUTPUT
Shoulder Diameter1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL D — Destroy Item
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3010-01-342-180163A141575P6 POSSIBLE MATCH
CONTROL,MOTOR-TRANSMISSION
Possible match (shared part number)Lockheed Martin Corporation Div Rotary and Mission Systems
7195-01-679-49343QSA 18-629 ENCBB3 POSSIBLE MATCH
BULLETIN BOARD
Possible match (shared part number)General Services Administration Federal Supply Service
Cross-Reference Index
Part NumberManufacturer
102622 General Dynamics Motion Control Llc (USA)
102622 PRIMARY L3harris Technologies, Inc Div Space & Airborne Systems (USA)
Reference documents
ReferenceMeaning
102622 5/9 Secondary reference
Moog Inc. Dba Moog Components Group
102622 5/9 Secondary reference
U.S. Government activity
Related Parts
3010-01-342-1801POSSIBLE MATCH
CONTROL,MOTOR-TRANSMISSION
63A141575P6
7195-01-679-4934POSSIBLE MATCH
BULLETIN BOARD
3QSA 18-629 ENCBB3

Frequently Asked Questions

What is NSN 5990-00-945-1033?

NSN 5990-00-945-1033 is a Synchro,transmitter, manufactured by L3harris Technologies, Inc Div Space & Airborne Systems, classified under FSC 5990, Synchros and Resolvers. Status: active.

What part numbers are listed for NSN 5990-00-945-1033?

NSN 5990-00-945-1033 has 2 manufacturer part numbers on file: 102622 (General Dynamics Motion Control Llc), 102622 (L3harris Technologies, Inc Div Space & Airborne Systems).

What NSN replaces 5990-00-945-1033?

2 possible matches (shared part number, not a government interchangeability claim): 3010-01-342-1801, 7195-01-679-4934. Verify interchangeability with system specifications before substitution.

What are the specifications of 102622?

Key specifications for 102622: Body Size: 15; Shaft Type: SPLINE W/THREADS SINGLE SHAFT; Flange Diameter: 1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN; Undercut Width: 0.0780 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5990-00-945-1033 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5990-00-945-1033?

NSN 5990-00-945-1033 has DEMIL Code D. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com