The Synchro,control Transformer, cataloged under National Stock Number 5990-00-940-8528, is classified within Federal Supply Class 5990 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Edo. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-940-8528 |
| Primary Part Number | 52196 |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — No Item Name Available |
| Manufacturer | Edo |
| Status | ACTIVE |
| Stator Input Electrical Power Rating | 200.0 MILLIWATTS NOMINAL |
| Material | STEEL CORROSION RESISTING BODY |
| Stator Input Current Rating | 18.0 MILLIAMPERES MAXIMUM |
| Terminal Type and Quantity | 5 SCREW |
| Zrs Impedance Magnitude in Ohms | 642.00 NOMINAL |
| Shaft Diameter | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT IN |
| Pilot Length | 0.0620 INCHES NOMINAL IN |
| Zso Impedance Angle in Deg | 80.40 NOMINAL |
| Stator Input Voltage Rating in Volts | 90.0 NOMINAL |
| Transformation Ratio | 0.735 ROTOR TO STATOR NOMINAL |
| Alignment Hole Bolt Circle Diameter | 0.8120 INCHES NOMINAL IN |
| Mounting Surface to Terminal End Distance | 1.7940 INCHES NOMINAL IN |
| Phase Shift Angle in Deg | 5.000 INPUT TO OUTPUT NOMINAL |
| Maximum Total Null Voltage Output in Millivolts Per Volt | 60.00 |
| Alignment Hole Quantity | 4 |
| Terminal Location | REAR |
| Zso Impedance Magnitude in Ohms | 5025.00 NOMINAL |
| Body Size | 11 |
| Frequency in Hertz | 400.0 NOMINAL |
| Electrical Error Angular Range in Minutes | -10.0 TO 10.0 |
| Fragility Factor | MODERATELY RUGGED |
| Shaft Type | ROUND SINGLE SHAFT |
| Shaft Length | 0.5620 INCHES NOMINAL SINGLE SHAFT IN |
| Alignment Hole Depth | 0.1250 INCHES MINIMUM IN |
| Zrs Impedance Angle in Deg | 27.00 NOMINAL |
| Maximum Fundamental Null Voltage in Millivolts Per Volt | 32.00 OUTPUT |
| Undercut Diameter | 0.9750 INCHES NOMINAL IN |
| Body Style | STANDARD ROUND C |
| Pilot Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 52196 | Edo (USA) |
NSN 5990-00-940-8528 is a Synchro,control Transformer, manufactured by Edo, classified under FSC 5990 (No Item Name Available). Status: active.
NSN 5990-00-940-8528 has 1 cross-referenced part number: 52196 (Edo).
There are 3 known substitutes for 5990-00-940-8528: 1270-00-674-7972, 4820-01-183-4736, 4720-01-244-3576. Verify interchangeability with system specifications before substitution.
Key specifications for 52196: Stator Input Electrical Power Rating: 200.0 MILLIWATTS NOMINAL; Material: STEEL CORROSION RESISTING BODY; Stator Input Current Rating: 18.0 MILLIAMPERES MAXIMUM; Terminal Type and Quantity: 5 SCREW. 30 total characteristics are documented in the Federal Logistics Information System.