PartsTable TECHNICAL DATA SHEET
NSN 5990-00-888-0718Government record, cited

Resolver, Electrical5990-00-888-0718

NSN 5990-00-888-0718 · NIIN 008880718
FSC 5990 — Synchros and Resolvers · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5990-00-888-0718 · 5990008880718 · NIIN 008880718 · 00-888-0718 · FSC 5990 Synchros and Resolvers · 917007-1 · BSC8LMJ05L300
Nearby stock numbers  ·
Features
  • Resolver,electrical — FSC 5990
  • Body Size: 8
  • Shaft Type: ROUND, SLOTTED SINGLE SHAFT
  • Flange Diameter: 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
  • Undercut Width: 0.0570 INCHES MINIMUM IN
  • Shaft Diameter: 0.1180 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT IN
  • Rotor DC Resistance in Ohms: 150.00 NOMINAL
  • Undercut Diameter: 0.6910 INCHES MAXIMUM IN
Identification
  • NSN: 5990-00-888-0718
  • NIIN: 008880718
  • FSC: 5990 — Synchros and Resolvers
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resolver,electrical, cataloged under National Stock Number 5990-00-888-0718, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5990-00-888-0718
Item NameResolver,electrical
FSC / FSG5990 / 59 — Synchros and Resolvers
StatusACTIVE
Body Size8
Shaft TypeROUND, SLOTTED SINGLE SHAFT
Flange Diameter0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
Undercut Width0.0570 INCHES MINIMUM IN
Shaft Diameter0.1180 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT IN
Rotor DC Resistance in Ohms150.00 NOMINAL
Undercut Diameter0.6910 INCHES MAXIMUM IN
Body StyleSTANDARD ROUND A
Flange Thickness0.0580 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
Rotor Input Electrical Power Rating390.0 MILLIWATTS NOMINAL
Phase Shift Angle in Deg20.000 INPUT TO OUTPUT MAXIMUM
Mounting Surface to Terminal End Distance1.3700 INCHES MAXIMUM IN
Frequency in Hertz400.0 NOMINAL
Zro Resistance in Ohms190.00 NOMINAL
Plus J Zso Reactance in Ohms135.00 NOMINAL
Terminal LocationREAR
Rotor Input Voltage Rating in Volts26.0 NOMINAL
Shaft Length0.3800 INCHES NOMINAL SINGLE SHAFT IN
Pilot Diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
Maximum Fundamental Null Voltage in Millivolts Per Volt20.00 OUTPUT
Maximum Total Null Voltage Output in Millivolts Per Volt30.00
Shaft Slot Width0.0200 INCHES NOMINAL SINGLE SHAFT IN
Interaxis Error Angular Range in Minutes-5.0 TO 5.0
Plus J Zro Reactance in Ohms560.00 NOMINAL
Transformation Ratio0.454 ROTOR TO STATOR NOMINAL
Pilot Length0.0430 INCHES NOMINAL IN
Zso Resistance in Ohms30.00 NOMINAL
Electrical Error Angular Range in Minutes-5.0 TO 5.0
Actuator Friction Torque at Plus 25 Deg Celsius3.00 CENTIMETER-GRAMS MAXIMUM CM
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL D — Destroy Item
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
917007-1 7/2 Vendor item drawing reference
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp
BSC8LMJ05L300 3/2 Design control — primary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5990-00-888-0718?

NSN 5990-00-888-0718 is a Resolver,electrical, classified under FSC 5990, Synchros and Resolvers. Status: active.

What are the specifications of 5990-00-888-0718?

Key specifications for 5990-00-888-0718: Body Size: 8; Shaft Type: ROUND, SLOTTED SINGLE SHAFT; Flange Diameter: 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN; Undercut Width: 0.0570 INCHES MINIMUM IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5990-00-888-0718 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5990-00-888-0718?

NSN 5990-00-888-0718 has DEMIL Code D. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com